Cart

Your Cart is Empty

Back To Shop

PCL-848A – IEEE-488 CONTROLLER

277,00  Excl. VAT

  • General Information PCL-848A

  • Introduction to the Product PCL-848A

The PCL-848A/B IPSE-488 interface card is a valuable addition to your PC that allows you to communicate with over 2000 products, made by over 200 manufacturers, in over 14 countries. The IEEE- 488-1978 standard that this IEEE-488 card implements is the most widely used international standard for information transfer between computer and electronic instruments. There are numerous publications and articles that may be used in conjunction with this manual to assist you to understand the interface standard. The IEEE reference document may be ordered by writing to the IEEE Service Center, 445 Hoes Lane, Piscataway, NJ 08854, USA.

 

The IEEE-488 interface card provides the hardware (electrical and mechanical) and software required for you to interface your PC to the IEEE-488 bus. The software is packaged in read-only-memory (firmware) to provide versatile and easy-to-use IEEE-488 function extensions for your current programming language or operating system. Firmware cannot be accidentally erased or overwritten and it is always available for use by application programs. This manual provided a programming reference (Section 3.) and programming techniques (Section 4. and 5.) to assist you in writing your own application programs.

The key features of this interface card include (PCL-848A) :

Operating in one of the two modes (switch selectable).

Mode A : Compatible with PCL-748 and use the on-board firmware driver.

Mode N : Software compatible with National Instrument PC-II and IBM-PC GP-IB adaptor and use the driver and software developed for them.

  • Implementation of the entire IEEE-488 PCL-848A
  • Powerful and  easy-to-use  software  command set. Fewer arguments and simple initialization.
  • Software driver  is in on-board firmware. Requires no additional disk operation when using BASIC or Turbo Pascal.
  • On-board RAM for working space. No system memory space is needed for the IEEE-488 interface operation.
  • Built-in 16 bit digital output port provides a convenient and economical solution for signal switching and digital control applications. The D/O port is compatible with the daughter boards: PCLD-785 Relay Output Board, PCLD-786 SSR & Relay Driver Board and PCL—789 Amplifier & Multiplexer Board.
  •  BASICA, BASIC compiler and Quick—BASIC are supported as
    standard languages. C and Pascal language support packages
    can he ordered separately as PCL-748—C and PCL—748-P.
  •  The software can change the PC printer port to an IEEE-438
    device. The PrtSc (print screen} key, all print statements,
    word processing and spreadsheet programs that use printer
    driver in BIOS can use IEEE—488 printers.
  •  High speed direct memory access (DMA) with the ability to
    handle 64K byte arrays.

1 in stock

  Ask a Question
  • General Information PCL-848A

  • Introduction to the Product PCL-848A

The PCL-848A/B IPSE-488 interface card is a valuable addition to your PC that allows you to communicate with over 2000 products, made by over 200 manufacturers, in over 14 countries. The IEEE- 488-1978 standard that this IEEE-488 card implements is the most widely used international standard for information transfer between computer and electronic instruments. There are numerous publications and articles that may be used in conjunction with this manual to assist you to understand the interface standard. The IEEE reference document may be ordered by writing to the IEEE Service Center, 445 Hoes Lane, Piscataway, NJ 08854, USA.

 

The IEEE-488 interface card provides the hardware (electrical and mechanical) and software required for you to interface your PC to the IEEE-488 bus. The software is packaged in read-only-memory (firmware) to provide versatile and easy-to-use IEEE-488 function extensions for your current programming language or operating system. Firmware cannot be accidentally erased or overwritten and it is always available for use by application programs. This manual provided a programming reference (Section 3.) and programming techniques (Section 4. and 5.) to assist you in writing your own application programs.

The key features of this interface card include (PCL-848A) :

Operating in one of the two modes (switch selectable).

Mode A : Compatible with PCL-748 and use the on-board firmware driver.

Mode N : Software compatible with National Instrument PC-II and IBM-PC GP-IB adaptor and use the driver and software developed for them.

  • Implementation of the entire IEEE-488 PCL-848A
  • Powerful and  easy-to-use  software  command set. Fewer arguments and simple initialization.
  • Software driver  is in on-board firmware. Requires no additional disk operation when using BASIC or Turbo Pascal.
  • On-board RAM for working space. No system memory space is needed for the IEEE-488 interface operation.
  • Built-in 16 bit digital output port provides a convenient and economical solution for signal switching and digital control applications. The D/O port is compatible with the daughter boards: PCLD-785 Relay Output Board, PCLD-786 SSR & Relay Driver Board and PCL—789 Amplifier & Multiplexer Board.
  •  BASICA, BASIC compiler and Quick—BASIC are supported as
    standard languages. C and Pascal language support packages
    can he ordered separately as PCL-748—C and PCL—748-P.
  •  The software can change the PC printer port to an IEEE-438
    device. The PrtSc (print screen} key, all print statements,
    word processing and spreadsheet programs that use printer
    driver in BIOS can use IEEE—488 printers.
  •  High speed direct memory access (DMA) with the ability to
    handle 64K byte arrays.
  •  Programmable system controller, active controller or device
    functions.
  •  All device functions, addresses, interrupt conditions, and
    parallel poll responses are programmable.
  •  Automatic initialization. Interface parameters are set to
    default when starting using the interface. Parameters can
    still be changed by calling the initialization routine.
  •  DIP switch selectable wait states (0/2/4/6 wait states) to
    ensure the compatibility to very high speed PC’s.
  •  PCL—84BA offers the connectors of the IEEE—4BB standard
    while PCL—BéBB uses the 25 pin D type connectors for the
    IEC-625 standard.
  •  Each device on the IEBE—488 bus can be assigned with its own
    terminator.

 

 

No more offers for this product!

Shipping Policy

Shipping Worldwide

Refund Policy

Refunds

Returns are only accepted if product are not as specified or have any defects.Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.

Late or missing refunds

If you haven’t received a refund yet, first check your bank account again.

Then contact your credit card company, it may take some time before your refund is officially posted.

Next contact your bank. There is often some processing time before a refund is posted.

If you’ve done all of this and you still have not received your refund yet, please contact us at {email address}.

Sale items

Only regular priced items may be refunded. Sale items cannot be refunded.

Exchanges

We only replace items if they are defective or damaged.

Gifts

If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.

If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and they will find out about your return.

Shipping returns

To return your product, you should mail your product.

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you may vary.

If you are returning more expensive items, you may consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

Need help?

Contact us at vendor@advantech.gr for questions related to refunds and returns.

Cancellation / Return / Exchange Policy

Overview

Our refund and returns policy lasts 30 days. Returns are only accepted if product are not as specified or have any defects.If 30 days have passed since your purchase, we can’t offer you a full refund or exchange.

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.

Additional non-returnable items:

  • Gift cards
  • Downloadable software products
  • Some health and personal care items

To complete your return, we require a receipt or proof of purchase.

Please do not send your purchase back to the manufacturer.

There are certain situations where only partial refunds are granted:

  • Book with obvious signs of use
  • CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened.
  • Any item not in its original condition, is damaged or missing parts for reasons not due to our error.
  • Any item that is returned more than 30 days after delivery


General Inquiries

There are no inquiries yet.

Cart

Your Cart is Empty

Back To Shop