PCL-752 – Intelligent SYSTEM MONITORCard
383,00 € Excl. VAT
Features PCL-752
• Monitoring +5VDC,-5VDC, +12VDC., -12VDC of ISA bus voltage
• Three external voltage sense inputs
• Three fan sense inputs for fan speed monitoring
• Three temperature sense inputs
• Two “power good” signal inputs for power supply monitoring
• Two isolated digital inputs
• Three relay outputs for alarm connection
• Watchdog timer for detecting system CPU operation
• One serial port can be set as a RS-232 or RS-485 port, supporting
modem output for connection to remote system center
• Three configurable alarm levels: Critical, major, minor
• Audible alarm with three sound effects
• On-board battery backup ensuring normal card operation in case of
• system power failure
• Built-in watchdog timer for self-detection ensuring reliable card
operation
• Compact half-sized card dimensions
1 in stock
Introduction
The PCL-752 is an intelligent PC-system monitoring card that can
detect the system operating conditions and generate alarm outputs or
messages to notify the user to take necessary action to avert system
failure. The PCL-752 transforms ordinary industrial PCs into intelli-
gent, self-diagnostic PCs. It also adds a dimension of reliability to
critical applications such as automated telephony.
Powerful Function
The PCL-752 can detect a wide variety of internal system conditions,
including temperature, voltage, fan rotation, power supply or CPU
operations such as watchdog timer. Depending on the alarm level or
user setup, it can generate several different alarm outputs, including
acoustic signal, system reset, relay output, or send out messages
through the serial port. The on-board CPU allows the user to set the
alarm criteria of each sense input independently, and to program
different alarm outputs to meet user requirements.
High Reliability
The PCL-752 features a built-in watchdog timer to ensure reliability.
Digital input lines are isolated up to 2000 VDc to prevent damage due
to high voltage input. The board’s battery backup enables the PCL-
752 to perform its alarm function even during total system power
failure.
Remote Monitoring
The PCL-752 is equipped with a serial port that can be used to link a
number of computers installed with the PCL-752. Through this serial
port, the user is able to monitor computers from one central computer.
This serial port can be configured as RS-232 to connect to a computer
nearby, or as RS-485 to cover a communication distance up to 4000
feet. By using a modem, users can even connect to anywhere a
telephone cable is available.
Features PCL-752
• Monitoring +5VDC,-5VDC, +12VDC., -12VDC of ISA bus voltage
• Three external voltage sense inputs
• Three fan sense inputs for fan speed monitoring
• Three temperature sense inputs
• Two “power good” signal inputs for power supply monitoring
• Two isolated digital inputs
• Three relay outputs for alarm connection
• Watchdog timer for detecting system CPU operation
• One serial port can be set as a RS-232 or RS-485 port, supporting
modem output for connection to remote system center
• Three configurable alarm levels: Critical, major, minor
• Audible alarm with three sound effects
• On-board battery backup ensuring normal card operation in case of
• system power failure
• Built-in watchdog timer for self-detection ensuring reliable card
operation
• Compact half-sized card dimensions
Shipping Policy
Shipping Worldwide
Refund Policy
Refunds
Returns are only accepted if product are not as specified or have any defects.Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at {email address}.
Sale items
Only regular priced items may be refunded. Sale items cannot be refunded.
Exchanges
We only replace items if they are defective or damaged.
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and they will find out about your return.
Shipping returns
To return your product, you should mail your product.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you may vary.
If you are returning more expensive items, you may consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Need help?
Cancellation / Return / Exchange Policy
Overview
Our refund and returns policy lasts 30 days. Returns are only accepted if product are not as specified or have any defects.If 30 days have passed since your purchase, we can’t offer you a full refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted:
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened.
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error.
- Any item that is returned more than 30 days after delivery
General Inquiries
There are no inquiries yet.
Related products
-
PCL-849A – 4 Port RS-232 Interface Card
174,00 € Excl. VATAdd to cartFeatures PCL-849A:
• Four independent RS-232 serial ports
• Transmission speeds up to 921.6 Kbps (PCL-849)
• Independent I/O addresses, independent/shared IRQ settings
for each of 4 serial ports
• Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15
• Supports standard DOS COM1, COM2, COM3, COM4
(PCL-849A/849B/849+)
• Supports surge protection: 3000 VDC (PCL-849B/849+)
• LED indicators on each port indicate data flow
• On-board interrupt status register for greater throughput
• Complete RS-232 modem-control signals
• Supports Windows 95/98/NT/ME/2000, Windows XP, Linux
(ICOM utility), DOS/Windows 3.1Introduction :
The PCL-849 series cards provide four individually configurable
RS-232 serial communication ports. The PCL-849A/849B/849L has a
16C554 UART which makes serial I/O more reliable. The higher
performance PCL-849+ has a 16C654 UART. By buffering data into
64-byte packets before putting it on the bus, UARTs drastically reduce
the CPU load. This makes the PCL-849+ especially suitable for high
speed serial I/O applications under multitasking environments.
The PCL-849 series cards support two operating modes, standard
mode and enhanced mode. In enhanced mode, the address for all four
ports can be set automatically. The PCL-849 series cards also support
either shared IRQ or independent IRQ functions. When an on-board
interrupt occurs, the interrupt status register (vector address) indicates
which port generated it. The shared interrupt can be set to most common
(extended) AT interrupts. This simplifies programming, speeds up
interrupt processing and frees up interrupts for other devices.Specifications PCL-849A :
• Ports: 4 serial ports
• I/O Address Range: from 200H to 3F8H
• IRQ: 3, 4, 5, 6, 7, 9, 10, 11, 12, 15
• Data Bits: 5, 6, 7, 8
• Stop Bits: 1, 1.5, 2
• Parity: none, even, odd
• UARTs: 1 x 16C554 (PCL-849A/849B/849L)
1 x 16C654 (PCL-849+)
• Speed: 50 ~ 921.6 Kbps (PCL-849A)
50 ~ 460.8 Kbps (PCL-849B/849+)
50 ~ 115.2 Kbps (PCL-849L)
• Cables: 30-cm male DB-37 to four male DB-25 (DTE)
• Data Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
• Surge Protection: 3000 VDC (PCL-849B/849+)
2000 VDC (PCL-849L)
• Power Requirements: +5 V @ 250 mA typical, 500 mA max.
±12 V @ 70 mA typical, 120 mA max.
• Dimensions: 185 mm x 100 mm (7.3″ x 3.9″)
• Operating Temperature: 0 ~ 60° C (32 ~ 140° F)
• Storage Temperature: -25 ~ 80° C (-13 ~ 176° F) -
PCL-847B – 4 Port RS-422/485 Card SurgeP
230,00 € Excl. VATAdd to cartFeatures PCL-847B:
• Four independent RS-422/485 serial ports PCL-847B
• Transmission speeds up to 921.6 Kbps
• Independent/shared IRQ settings between each of the 4 serial ports
• Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15
• Supports standard DOS COM1, COM2, COM3, and COM4
• Supports DOS/Windows 3.1 (PC-ComLIB), Windows 95/98,
Windows NT (ICOM Utility)
• Provides 1000 VDC isolation (PCL-846A/846B only)
• Provides 3000 VDC surge protection (PCL-846B/847B)
• Space reserved for termination resistors
• Supports 2 wire or 4 wire operation
• Supports Tx, Rx, RTS, and CTS signals
• Automatic RS-485 data flow control or RTS controlIntroduction PCL-847B:
PCL-846/847 series cards provide four independent RS-422/485
serial ports on a card. Each port has a 16C550 UART with an on-chip
16-byte FIFO buffer for reliable, high-speed serial I/O. The UART
buffers data into 16-byte packets before putting it on the bus. This
drastically reduces the CPU load and avoids data loss when the
system is busy and cannot process the interrupt quickly. The UART
is especially useful for high speed serial I/O under Windows.
PCL-846 cards differ from PCL-847 cards in that they utilize
on-board optical isolators to protect your PC and equipment against
damage from ground loops, increasing system reliability in harsh
environments. To further increase reliability, PCL-846B/847B cards
include surge protection technology, protecting your system from
abrupt high voltage surges (up to 3000 V) such as those caused by
lightning during thunderstorms.
An RS-485 Network with Automatic Data Flow Control
Using RS-232 Software
The RS-485 mode automatically senses the direction of incoming
data and switches its transmission direction accordingly. This feature
makes your network look and act just like an RS-232 network.
Application software written for half duplex RS-232 can be used
without modification. Moreover, you can simply and quickly build an
RS-485 network with just two wires. -
PCL-860 – 4 1/2 DIGIT VOLTMETER (Rev A2)
350,00 € Excl. VATAdd to cartIntroduction
The PCL-860 is a 4 1/2 digit DC/AC voltmeter card that plugs into any I/O slot of IBM PC/XT/AT or compatible computers.It provides all the features and accuracy you would expect from a bench-top voltmeter.
It uses the computer screen as its display and it takes one forth of the screen when activated. This size allows 4 separate PC’s instruments (including the PCL-860) display on the screen at same time. In addition, instead of using push-buttons on the instrument front panel,it uses the computer keyboard.The PCL-860 provides a standard programmable DC current source.It can be used as a 4-wire resistance precision ohmmeter. The PCL-860 has also a build-in 16 bit digital output
1.2. Specifications PCL-860
Input impedance 10Mohm
DC voltage
Range Resblution Accuracy200mv 10uv ±0.03%+1
2V 100uV ±0.03%+1
20V lmV ±0.03%+1
200V 10mV ±0.03%+1Over voltage : 250V DC or peak AC
AC voltage : True RMS
Range Resblution Accuracy
200mv 10uv ±0.03%+1
2V 100uV ±0.03%+1
20V lmV ±0.03%+1
200V 10mV ±0.03%+1250V DC or peak AC
AC bandwidth :10KHz
Current source : 0.1mA, lmA, 10mA , user defined (< =1OmA)
* Resistance : (4 wire measurement with current source)
Range Resolution Accuracy Current Source20ohm 1 mili-ohm ±0.03% +1 10mA
200ohm 10 mili-ohm ±0.03%+ 1 10mA
2Kohm 0.1ohm ±0.03% +1 lmA
20Kohm lohm ±0.03%+1 0.1mA
* Conversion rate : 2.5, 5, 10 reading/sec
* Digital output : 16 channel TTL compatible 8.0mA sink and 0.4 mA driver
General :
* Power consumption : +5V, 390mA; +12V, 210mA typical* Digital output connecter: 20 pin flat cable connector with +5V, +12V, ground
* I/O base address : &H200-&H3F0 (factory setting is &H230)
* Operating temperature : 0 – 50°C
* Storage temperature : -20 – 65°C
* Weight : 290gm