Vendor Advantech AE.
Showing 31–40 of 69 results
-
PCI-1730 – 32Ch.Isolated DIO Card PCI BUS
171,00 € Excl. VATAdd to cartFeatures PCI-1730 :
√ISA-Compatible with PCL-730/733/734
√32-ch Isolated DI/O (16 inputs and 16 outputs)
√32-ch TTL Isolated DI/O (16 inputs and 16 outputs)
√High output driving capacity
√Interrupt capability
√Two 20-pin connectors for isolated digital I/O channels and two for TTL
digital I/O channels
√D-type connector for isolated input and output channels
√High-voltage isolation on output channels -
PCI-1733 – 32Ch.Isolated DI Card PCI BUS
149,00 € Excl. VATAdd to cartFeatures PCI-1733 :
• 32 isolated, bidirectional digital input
channels
• High-voltage isolation (2,500 V DC)
• Interrupt capacity
• D-type connectors for isolated input
channels
• Reverse voltage protection for isolated
input channels
(up to 24 VDC) -
PCI-1737U – 24 Channel TTL Digital I/O Card
93,00 € Excl. VATAdd to cartFeatures PCI-1737U :
√24 TTL digital I/O channels
√Emulates mode 0 of 8255 PPI
√Interrupt handling
√Opto-22 compatible 50-pin connectors
√Output status readback
√PCI universal cardSpecifications:
Digital Input:
√Channels 24 (shared with output)
√Compatibility 5 V/TTL
√Input Voltage Logic 0: 0.8 V max.
√Logic 1: 2.0 V min.
√Interrupt Capable Ch. 1
Digital Output
√Channels 24 (shared with input)
√Compatibility 5 V/TTL
√Output Voltage Logic 0: 0.4 V max.
√Logic 1: 2.4 V min.
√Output Capability Sink: 0.4 V max. @ 24 mA
√Source: 2.4 V min. @ 15 mA
General
√Bus Type PCI-1737: Universal PCI V2.2
√PCL-724: ISA
√I/O Connectors 50-pin male ribbon-cable connector
√Dimensions (L x H) 175 x 100 mm (6.9″ x 3.9″)
√Power Consumption Max: +5 V @ 294.9 mA
√Operating Temperature 0 ~ 65° C (32 ~ 149° F)
√Storing Temperature -25 ~ 80° C (-13 ~ 176° F)
√Storing Humidity 5 ~ 95% RH, non-condensing (refer to IEC 68-2-3) -
PCI-1753 – 96bit Digital I/O Card PCI BUS
177,00 € Excl. VATAdd to cartFeatures PCI-1753 :
• 96/192 TTL digital I/O lines
• Emulates mode 0 of 8255 PPI
• Buffered circuits for higher driving capacity than 8255
• Multiple-source interrupt handling
• Interrupt output pin for simultaneously triggering external
devices with the interrupt
• Output status read-back
• “Pattern match” and “Change of state” interrupt functions for
critical I/O monitoring
• Keeps I/O setting and digital output values when hot system
reset
• Supports dry contact and wet contact
• High-density 100-pin SCSI connectorIntroduction PCI-1753 :
The PCI-1753 is a 96-bit digital I/O card for the PCI bus, which can be
extended to 192 digital I/O channels by connecting with its extension
board, PCI-1753E. The card emulates mode 0 of the 8255 PPI chip,
but the buffered circuits offer a higher driving capability than the 8255.
The 96 I/O lines are divided into twelve 8-bit I/O ports: A0, B0, C0, A1,
B1, C1, A2, B2, C2, A3, B3 and C3. Users can configure each port as
input or output via software.
Easy to Install: Plug and Play
The PCI-1753 uses a PCI controller to interface the card to the PCI bus.
The controller fully implements the PCI bus specification Rev 2.1. All
bus relative configurations, such as base address and interrupt
assignment, are automatically controlled by software.Dry Contact Support for Digital Input
Each digital input channel of the PCI-1753/1753E accepts either 0 ~ 5
VDC wet contact or dry contact inputs. This dry contact capability allows
the channel to respond to changes in external circuitry (e.g., the closing
of a switch in the external circuitry) when no voltage is present in the
external circuit.
Reset Protection Fulfills the True Requirement of Industrial
Applications
When the system is hot reset (the power is not turned off), the
PCI-1753/1753E can either retain the value of the last I/O port settings
and outputs, or return to its default configuration, depending on the
jumper setting. This function protects the system from wrong operations
during unexpected system resets.Interrupt Functions Ensure Faster System Response
Two lines of each port C (i.e., ports C0, C1, C2 and C3) are connected
to an interrupt circuit. The “Interrupt Control Register” of the
PCI-1753/PCI-1753E controls how these signals generate an interrupt.
Two interrupt request signals can be generated at the same time, and
then the software can process these two request signals by ISR. The
dual interrupt sources provide the card with more capability and flexibility.
The PCI-1753/1753E also provides “Pattern Match” interrupt function
for port A0. The card monitors the states of port A0 and compares
them with a pre-set pattern. When the received state matches the preset pattern, the PCI-1753/1753E generates an interrupt signal to the
system.
“Change of State” interrupt function is provided at port B0. When any
signal line of port B0 changes its state, the card generates an interrupt
to the system to handle this event.
These interrupt functions release the CPU from the burden of pulling all
I/O points, enabling a PC to handle more I/O points with higher
performance.Cost Savings for Increasing the Number of Input/Output Lines
Industrial users are needing more and more digital I/O lines to transmit
data or to monitor/control outside devices. To meet this trend and to
satisfy user’s budget considerations, Advantech has developed an
extension board for the PCI-1753 called the PCI-1753E. The PCI1753E has almost the same structure as the PCI-1753, without the
interface controller. It shares PCI-1753’s interface controller through a
10-cm flat cable connection, so users can spend less money while
doubling the number of input/output lines.
Accessories for PCI-1753/1753E
The PCI-1753/1753E uses a 100-pin SCSI female connector. For easy
signal wiring, a PCI-1753 can be connected to two ADAM-3968s by a
100-pin to 2×68-pin SCSI cable (part number PCL-10268). The
ADAM-3968 allows easy access for wiring the individual pins of a
68-pin SCSI connector. An ADAM-3968/50 adapter board converts the
68-pin connector to two opto-22 compatible 50-pin box headers
for connecting the PCI-1753/1753E to daughterboards, such as
PCLD-782B and PCLD-785B. -
PCI-1757UP – 24bit ttl Digital I/O Card Low Profile PCI BUS Card
119,00 € Excl. VATAdd to cartFeatures PCI-1757UP :
• Low profile PCI card PCI-1757UP
• Universal PCI card, adapt 3.3V and 5V PCI slot
• 24 TTL level digital I/O lines
• Emulates mode 0 of 8255 PPI
• Buffered circuits provide higher driving capability
• Output status read-back
• I/O configurable by software or on board DIP switch
• Keeps port I/O settings and digital output states after hot reset
• Board ID set by DIP switch
• High density D-SUB 25-pin connectorIntroduction:
The PCI-1757UP is a 24-bit DI/O 1low profile PCI card. It meets the PCI
standard REV.2.2 (universal PCI expansion card), and works with both
3.3V and 5V PCI slot. It provides users with 24 bits of parallel digital
input/output, emulates mode 0 of the 8255 PPI chip, but the buffered
circuits offer a higher driving capability than the 8255.Specifications PCI-1757UP :
Digital Input
• Logic High Voltage: 2.0 to 5.25 V
• Logic Low Voltage: 0.0 to 0.80 V
• High Level Input Current: 20 mA
• Low Level Input Current: -0.2 mA
Digital Output
• Logic High Voltage: 2.4 V minimum
• Logic Low Voltage: 0.4 V maximum
• High Level Input Current: 15 mA maximum (source)
• Low Level Input Current: 24 mA maximum (sink)
• Driving Capability: 15 LS TTL
Interrupt Source
• PC0, PC4
General
• Connector: one D-SUB 25-pin female connector
• Power Consumption: 5 V @ 140 mA (Typical)
• Operating Temperature: 0 ~ 70° C (32° F ~ 158° F)
• Storage Temperature: -20 ~ 80° C (-4° F ~ 176° F)
• Humidity: 5% ~ 95% non-condensing• Dimension: 119.91 x 64.41 mm (4.721″ x 2.536″) Low profile PCI
MD1 card sizeOrdering Information
❑ PCI-1757UP
24-channel Digital Input/Output Card
❑ ADAM-3925
DB-25 wiring terminal for DIN-rail mounting -
PCI-1763UP – 8 Channel Relay & 8 Channel Isolated DI Card
212,00 € Excl. VATAdd to cartFeatures PCI-1763UP
√8 relay output channels and 8 isolated digital input channels
√LED indicators to show activated relays
√8 Form C type relay output channels
√Output status read-back
√Retained relay output values when hot system reset
√High-voltage isolation on input channels (2,500 VDC)
√High ESD protection (2,000 VDC)
√High over-voltage protection (70 VDC)
√Wide input range (10 ~ 50 VDC)
√Interrupt handling capability
√Support Universal PCI Bus
√Low Profile PCI card
√BoardID™ switch PCI-1763UPIntroduction
PCI-1763UP relay actuator and isolated digital input card is an add-on card for the PCI bus. It provides 8 optically-isolated digital inputs with isolation protection of 2500 VDC for
collecting digital inputs in noisy environments, and 8 relay actuators for serving as on/off control devices or small power switches. For easy monitoring, each relay is equipped with
one red LED to show its on/off status. PCI-1763UP’s eight optically-isolated digital input channels are ideal for digital input in noisy environments or with floating potentials. The low
profile PCI form factor and universal PCI connector (V2.2 compliant), meet requirements for size and reduced power consumption.Specifications PCI-1763UP:
Isolated Digital Input
Channels 8
Input Voltage Logic 0: 3 V max.
Logic 1: 10 V min. (50 V max.)
Input Current 3.16 mA @ 10 VDC
17.3 mA @ 50 VDC
Interrupt Capable Ch. 8
Isolation Protection 2,500 VDC
Overvoltage Protection 70 VDC
Opto-isolator Response 25 µs
Input Resistance 2.8 KΩ
Relay Output
Channels 8
Relay Type DPDT, Form C
Contact Rating 240 VAC @ 0.25 A, or 30 VDC @ 1 A
Relay on Time 5 ms max.
Relay off Time 4 ms max.
Life Span 1 x 10^7 @ 6 V/100 mA
Resistance Contact: < 50 mΩ
Insulation: 1 GΩ min. (at 500 VDC)General
I/O Connector Type DB44 female
Dimensions 119.91 x 64.41 mm (Low-Profile MD1)
Power Consumption +5V @ 107.5 mA (typical)
+5V @ 301.3 mA (max.)
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1,2)
Storing Temperature -20 ~ 70° C (-4 ~158° F)
Storing Humidity 5 ~ 95 % RH, non-condensing (refer to IEC 68-2-3)Ordering Information
PCI-1763UP Low-profile 8-ch Relay/Isolated DI Card
PCL-10144-1 DB 44-pin cable, 1 m
ADAM-3944 DB-44 Wiring Terminal for DIN-rail mounting -
PCI-7032F-00
401,00 € Excl. VATAdd to cartFeatures PCI-7032F-00:
√ Ultra low power Intel® Celeron processor J1900/N2930, VG SKU is fan-less
design pci-7032f-00
√ Dual channel DDR3L 1066/1333 on 204-pin SO-DIMM socket
√ Dual independent display
√ Up to 2 GbE LAN
√ 2 SATA 2.0 (300 MB/s), one of them can be configured as m-SATA
√ Legacy I/O: 4 RS-232/422/485, and 1 LPT supportInterface 10/100/1000 Mbps
Controller LAN1: Intel I211
LAN2: Intel I211 (G2, F)
Connector RJ-45 with LED Connector x 2 -
PCL-721 – 32 Channel D/I Card
156,00 € Excl. VATAdd to cartIntroduction PCL-721 :
The PCL-721/723 is a 32/24-channel digital input card with independent
interrupt capabilities that allows the PCL-721/723 to work in the
background while the processor perform other jobs in the foreground. With
this feature, your system can do real-time Process monitoring without
polling its inputs, channel by channel.The PCL-721/723 has two modes: normal and interrupt. While it is set to
normal mode, the PCL-721/723 serves as a general purpose multi-channel
digital input card. However,if it is set to interrupt mode, then each channel
will generate an interrupt request to the PC, once the channel input has
changed.The 32digital input channels ofthe PCL-721 are divided into 4 groups. The
24 digital input channels of the PCL-723 are divided into 3 groups. Each
group handles8 digital input channels. There is a register that reflects the
interrupt status of each groups. Users can first read this register to check
which group caused the interrupt, then by reading the 8channels’ status of
that group, you can easily find which channel generated the interrupt. This
two-pass feature saves lot of time to determine which service routine should
be executed in your ISR (Interrupt Service Routine).The PCL-721/723 is easy to configure. No switch or jumper settings are
needed (except the I/O base address). The IRQ level, individual channel’s
trigger mode (rising or falling edge), and interrupt mask (enable or disable)
are all software programmable -
PCL-731 – 48bit Digital I/O Card
131,00 € Excl. VATAdd to cartFeatures:
• 48 digital I/O lines
• Emulates 8255 PPI mode 0
• Buffered circuits for higher driving capacity than the 8255
• Interrupt handling
• Output status readback
• Pin compatible with Opto-22 I/O module racksIntroduction :
The PCL-731 offers 48 programmable digital I/O lines. Each port
emulates the operation of an 8255 Programmable Peripheral
Interface (PPI) chip in mode 0, but provides a higher driving capacity
than the 8255.
The card’s DIO ports are combined into 8-bit ports, six for the
PCL-731. You can configure each port individually by software for
either input or output. The card can directly interface with SSR
module carrier boards through a 50-pin Opto-22 compatible
connector.
The PCL-731 is a low-cost alternative of the PCL-722. Like the
PCL-722 it provides a readback feature which lets you monitor the
status of the output by reading back the output portApplications
• Digital I/O control
• Industrial monitoring and control
• Interfacing with parallel I/O devices
• Interfacing with Opto-22 compatible I/O module racks
Specifications
• I/O lines: 48
• Programming mode: 8255 PPI mode 0
• Interrupt: Bit 0 of one port can generate an interrupt to
IRQ 2~15
• Interrupt triggering: Rising or falling edge triggering, jumperselectable
• Digital output: Logic 0: 0.4 V max. @ 24 mA (sink)
Logic 1: 2.4 V min. @ 15 mA (source)
• Digital input: Logic 0: 0.4 V max.
Logic 1: 2.4v minGeneral PCL-731
• Power consumption:+5 V @ 0.5 A typical
+5 V @ 0.8 A max.
• Operating temperature: 0 ~ +60° C (32 ~ 140° F)
• Storage temperature: -20 ~ +70° C (-4 ~ 158° F)
• Operating humidity: 5 ~ 95% RH non-condensing (refer to IEC
68-2-3)
• Connectors: 2×50-pin male ribbon-cable connectors
• Dimensions: 185 mm (L) x 100 mm (H) (7.3″ x 3.9″)Ordering Information
PCL-731: 48-bit digital I/O card and manual
PCL-10150-1.2: 50-pin flat cable, 1.2 m
PCLD-782B: 24/16-ch. opto-isolated digital input board
PCLD-785B: 24/16-ch. relay output board
PCLD-7216: 16-ch. carrier board for SSR I/O modules
PCLD-885: 16-ch. power relay (Form A) output board
PCLS-OCX: ActiveX Control for data acquisition and control.
ADAM-3950: 50-pin flat cable wiring terminal for DIN-rail -
PCL-733 – 32Ch.Isolated DI Card W.Inter.
212,00 € Excl. VATAdd to cartFeatures PCL-733 :
√ 32 isolated, digital input channels PCL-733
√ High-voltage isolation (2,500 VDC)
√ Interrupt capacity
√ D-type connectors for isolated input channels
√ Reverse voltage protection for isolated input channels (up to 24 VDCSpecifications PCL-733 :
Isolated Digital Input
√ Input Channels 32 (16-ch/group)
√ Input Voltage Logic 0: PCI-1733: 2 V max., PCL-733: 1 V max.
Logic 1: 5 V min.
PCI-1733: 30 V max., PCL-733: 24 V max.√Interrupt Capable Ch. 4 for PCI-1733, 2 for PCL-733
√ Isolation Protection 2,500 VDC
√ Opto-Isolator Response PCL-733: 100 µs, PCI-1733: 25 µs
√ Input Resistance PCI-1733: 2.7 kΩ @ 1 W
: 1.2 kΩ @ 0.5 W
General
√ Bus Type PCI-1733: PCI V2.2, : ISA
√ I/O Connectors 1 x 37-pin D-type female
√ Dimensions (L x H) : 185 x 100 mm (7.3” x 3.9”)
: 175 x 100 mm (6.9” x 3.9”)
√ Power Consumption
: Typical: +5 V @ 320 mA
Max: +5 V @ 500 mA
PCI-1733: Typical: 5V @ 200 mA, 12 V @ 50 mA
Max: 5V @ 350 mA, 12 V @ 75 mA
√ Operating Temperature 0 ~ 60° C (32 ~ 140° F)
√ Storing Temperature PCL-733: -20 ~ 70° C (-4 ~ 158° F)
PCI-1733: -25 ~ 85° C (-13 ~ 185° F)
√ Storing Humidity 5 ~ 95% RH, non-condensing (IEC 68-2-3)Ordering Information
√ PCI-1733 32-channel isolated PCI digital input card, manual and
driv er CD-ROM (cable not included)
√ 32-channel isolated digital input card, manual and
driver CD-ROM (cable not included)
√ PCLD-780 Universal screw terminal board
√ PCLD-880 Universal screw terminal board
√ ADAM-3937 DB37 wiring terminal for DIN-rail mounting
√ PCL-10137-1 DB37 cable, 1m
√ PCL-10137-2 DB37 cable, 2m
√ PCL-10137-3 DB37 cable,
