Showing 21–30 of 70 results

• 

  EKI-1121L – 1 Port Programmable Device Server CPU ARM7

  204,00 € Excl. VAT

  Features  EKI-1121L  :

  √ARM7 32-bit 80MHz processor
  √ 8MB Flash ROM on board
  √16MB SDRAM
  √ 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  √ 1 or 2 software selectable RS-232/422/485 serial ports
  √ 50 bps to 921.6 kbps baud rate
  √ Built-in real-time clock (RTC)
  √ Class I, Division 2 certification
  √ Pre-installed Linux Kernel 2.4 platform

  Introduction :

  EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or
  two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or
  protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications.

  Specifications of EKI-1121L :

  System
  √ CPU ARM7 32-bit RISC CPU, 80 MHz
  √ Flash 8 MB
  √ SDRAM 16 MB
  √ OS (pre-installed) uClinux
  √ Console Port RS-232, 3-wire (Tx, Rx, GND) pin-header
  √ Other RTC, watchdog timer

  Ethernet Interface
  √ LAN 2 x auto-sensing 10/100 Mbps ports
  √ Connector RJ-45
  √ Protection 1.5 kV magnetic isolation protection
  Serial Interface
  √ Serial Standards Software selectable RS-232/422/485 ports
  √ Connectors D-sub 9 male
  √ Protection 15 kV ESD protection for all signals
  Serial Parameters
  √ Data Bits 5, 6, 7, 8
  √ Stop Bits 1, 1.5, 2
  √ Parity None, Even, Odd, Space, Mark
  √ Flow Control RTS/CTS, XON/XOFF, automatic RS-485 data flow
  control
  √ Baud Rate 50 bps to 921.6 kbps

  Serial Signals
  √ RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND
  √ RS-422 TxD+, TxD-, RxD+, RxD-, GND
  √ RS-485 Data+, Data-, GND
  LEDs
  √ System OS ready, power 1 and power 2 ready
  √ LAN Speed (10/100 Mbps), link/active (on connector)
  √ Serial TxD, RxD

  Mechanics
  √ Dimensions 37 x 140 x 95 mm (W x H x D)
  √ Housing Metal
  √ Weight 600g
  √ Mounting DIN-rail, wall
  Power Requirements
  √ Input Voltage 12 ~ 48 VDC, redundant dual inputs
  √ Power Consumption 2.5 W
  Software (uClinux)
  √ Kernel Version 2.4.31
  √ Protocol Stack TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP,
  NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
  √ File System ROMFS/JFFS2
  √ System Utility busybox, telnet, ftp, sash, tftp
  √ Daemon pppd, snmpd, telnetd, inted, ftpd, boa
  √ Linux Tool Chain Arm-elf-gcc: C/C++ PC Cross Compiler
  √ uClibc POSIX Standard Library

  Add to cart
• 

  EKI-1122L – 2 Port Programmable Device Server CPU ARM7

  248,00 € Excl. VAT

  Features  EKI-1121L  :

  √ARM7 32-bit 80MHz processor
  √ 8MB Flash ROM on board
  √16MB SDRAM
  √ 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  √ 1 or 2 software selectable RS-232/422/485 serial ports
  √ 50 bps to 921.6 kbps baud rate
  √ Built-in real-time clock (RTC)
  √ Class I, Division 2 certification
  √ Pre-installed Linux Kernel 2.4 platform

  Introduction :

  EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or
  two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or
  protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications.

  Specifications of EKI-1122L :

  System
  √ CPU ARM7 32-bit RISC CPU, 80 MHz
  √ Flash 8 MB
  √ SDRAM 16 MB
  √ OS (pre-installed) uClinux
  √ Console Port RS-232, 3-wire (Tx, Rx, GND) pin-header
  √ Other RTC, watchdog timer

  Ethernet Interface
  √ LAN 2 x auto-sensing 10/100 Mbps ports
  √ Connector RJ-45
  √ Protection 1.5 kV magnetic isolation protection
  Serial Interface
  √ Serial Standards Software selectable RS-232/422/485 ports
  √ Connectors D-sub 9 male
  √ Protection 15 kV ESD protection for all signals
  Serial Parameters
  √ Data Bits 5, 6, 7, 8
  √ Stop Bits 1, 1.5, 2
  √ Parity None, Even, Odd, Space, Mark
  √ Flow Control RTS/CTS, XON/XOFF, automatic RS-485 data flow
  control
  √ Baud Rate 50 bps to 921.6 kbps

  Serial Signals
  √ RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND
  √ RS-422 TxD+, TxD-, RxD+, RxD-, GND
  √ RS-485 Data+, Data-, GND
  LEDs
  √ System OS ready, power 1 and power 2 ready
  √ LAN Speed (10/100 Mbps), link/active (on connector)
  √ Serial TxD, RxD

  Mechanics
  √ Dimensions 37 x 140 x 95 mm (W x H x D)
  √ Housing Metal
  √ Weight 600g
  √ Mounting DIN-rail, wall
  Power Requirements
  √ Input Voltage 12 ~ 48 VDC, redundant dual inputs
  √ Power Consumption 2.5 W
  Software (uClinux)
  √ Kernel Version 2.4.31
  √ Protocol Stack TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP,
  NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
  √ File System ROMFS/JFFS2
  √ System Utility busybox, telnet, ftp, sash, tftp
  √ Daemon pppd, snmpd, telnetd, inted, ftpd, boa
  √ Linux Tool Chain Arm-elf-gcc: C/C++ PC Cross Compiler
  √ uClibc POSIX Standard Library

  Add to cart
• 

  FPM-3220T – 12″ Industrial Grade Flat Panel Monitor. VGA, Keypad

  944,00 € Excl. VAT

  Features of FPM-3220T:

   

  √12.1″ SVGA TFT LCD with resolution up to 800 X 600
  √ Standard RGB (VGA) interface for the display
  √ Display with multi-scan function supports SVGA, VGA, VGA-Text
  √ Front accessible display on/off switch
  √ OSD key on back cover
  √ 60 data-entry keys, one with 10 function keys and 10 programmable macrofunction keys
  √ Optional FDD and CD-ROM installation housing
  √ Stainless steel chassis
  √ NEMA4/IP65-compliant aluminum front panel
  √ Rack, panel or wall mount
  √ Supports VESA arm

  Introduction:

  The FPM-3220 control panel series from Advantech incorporates a LCD control panel with 64 data-entry keys, 10 function keys, 10 unique programmable macro keys and a 12.1″ SVGA
  800 x 600 TFT LCD screen. The strong membrane key function gives the FPM-3220 powerful panel programming benefits like standard workstations, but no deep space problems.
  Equipped with a direct VGA interface, the FPM-3220 can connect to any PC Box over long distances without the wiring and cabling limits faced by traditional bulky workstations.
  Optional front FDD access design gives users the ability to easily retrieve and install data. The FPM-3220 is a perfect and cost effective control panel selection with PCs for machine
  builders like packaging, cutting, CNC, and production line control.

   

   

  Specifications  of FPM-3220T :

  √ Display Type 12.1″ color TFT LCD FPM-3220T
  √ Display Resolution SVGA (800 x 600)
  √ Display Control Front accessable display on/off switch and OSD (on screen display) key on back cover
  √ Display Interface Standard analog RGB (VGA) 15 pin connector
  √ Membrane Keypads One with 60 data-entry keys, one with 10 function keys and 10 programmable macro function keys
  √ Keyboard/mouse Two 6-pin PS/2 keyboard/mouse connectors available,
  Connector One on front panel and the other on back chassis
  √ Front Panel Aluminum, NEMA4/IP65 compliant
  √ Mounting Rack, panel, wall mount, VESA arm
  √ Power External 48 W power adapter, with AC 100 V ~ 230 V
  input and DC +12 V @ 4 A output
  √ Disk Drive Housing Kit Supports one slim 3.5″ FDD and one slim CD-ROM
  (Optional)
  √ Operating Temperature 0 ~ 50° C (32 ~ 122° F)
  √ Relative Humidity 5 ~ 85 % @ 40° C, non-condensing
  √ Storage Temperature -20 ~ 60° C (-4 ~ 140° F)
  √ Storage Humidity 5 ~ 95 % non-condensing
  √ Dimensions (WxHxD) 482 x 266 x 63 mm (19.0″ x 10.5″ x 2.5″)
  √ Net Weight 4.2 kg (9.3 lbs)
  √ CE, CCC, FCC, and BSMI compliant

  Touchscreen (Optional)

  √ Type 8 wire, analog resistive
  √ Resolution Continuous
  √ Light Transmission 75%
  √ Controller RS-232 interface
  √ Power Consumption +5 V @ 200 mA
  √ OS Support MS-DOS, Windows® 3.1/95/98/NT/2000
  √ Lifespan 1 million touches at a single point
  √ 12.1″ SVGA TFT LCD with resolution up to 800 X 600
  √ Standard RGB (VGA) interface for the display
  √ Display with multi-scan function supports SVGA, VGA, VGA-Text
  √ Front accessible display on/off switch
  √ OSD key on back cover
  √ 60 data-entry keys, one with 10 function keys and 10 programmable macro function keys
  √ Optional FDD and CD-ROM installation housing
  √ Stainless steel chassis
  √ NEMA4/IP65-compliant aluminum front panel
  √ Rack, panel or wall mount
  √ Supports VESA arm

  Add to cart
• 

  FWA-1305-02 – Tabletop Fanless Network Application Platform

  482,00 € Excl. VAT

  FEATURES:

  √Supports Intel® Atom™ D510/D410 Processor FWA-1305
  √ Single channel DDR2 667 SODIMM, up to 2 GB
  √ Two GbE LAN ports for Management
  √ Supports one fixed 2.5″ SATA HDD

  Introduction FWA-1305 :

  FWA-1305 Conceived as a powerful but low power consumption Internet security platform, the FWA-1305 series was specifically designed for mainstream IDS/IPS, Anti-virus, VPN gateway
  and Unified Threat Management (UTM) applications. The FWA-1305 adopts the latest Intel® Atom™ processor and Intel® 82801HBM I/O Controller Hub. This supports up to 4 GB of
  Single-channel DDR2 SDRAM on two DIMMs. The platform reserves space for one 2.5″ SATA HDD and one CompactFlash slot for storing or upgrade OS and other network security
  applications. The platform has five PCIe x1 lanes connected directly to the Intel® 82583V Ethernet controllers and one 82567V Gbe PHY to offer 6 ports of Gigabit Ethernet at wire
  speed. Moreover, the FWA-1305 is designed with the fanless cooling for the low noise environment requirement. It is FCC, CE, UL, CCC and RoHS compliant.

  CPU (45 nm) Intel Atom D510 Intel Atom D410
  Max. Speed 1.66 GHz (Dual Core) 1.66 GHz (Single Core)
  L2 Cache 1 M 512 KB
  Chipset ICH8M
  BIOS AMI 16 Mbit SPI

  Technology Single-channel DDR2 667 SODIMM
  Capacity Up to 2 G
  Gigabit Ethernet 1 x 82567V GbE,1 x 82583V GbE 4 10/100/1000 Mbps PCIe GbE ports
  GbE Controller 4 x Intel 82583V

  Add to cart
• 

  ITM-5112R-C – 12″ Industrial Touch Panel Computer. CPU Atom D525 1,8GHz

  295,00 € Excl. VAT

  Features ITM-5112R-C:

  ITM-5112 12″ SVGA Industrial LED Monitor with
  Fully Flat Resistive Touchscreen
  √ 12.1″ Mitsubishi SVGA LED backlight panel provides 20 ~ 30% power
  savings
  √ -20° C ~ +60° C wide range operating temperature
  √ Easy-clean 5-wire resistive touch plane
  √ VGA & DVI interface
  √ Peripheral connectors in frame rail design
  √ Simple, elegant design with IP54 front panel protection
  √ Supports panel, wall, desktop, and swing-arm VESA mounting
  √ Combo RS-232 & USB interface for touchscreen function
  √ Optional ARK-1500-series Box PC in rear AD box for all-in-one, total solution

  Add to cart
• 

  MIO-5251J-U0 – SBC Celeron 2GHz 0 RAM VGA,HDMI/DP,LVDS 2xGbE,2xRS-232,2xRS-232/422/485,4xUSB2,1XUSB3,Audio,SATAII,m

  415,00 € Excl. VAT

  Features MIO-5251 :

  √ Intel® Celeron J1900 & Atom E3825/E3845, DDR3L-1066/1333MHz
  SODIMM up to 8GB
  √ DirectX11, OpenGL3.2, OpenCL1.2, multi-display: VGA+LVDS/eDP+ HDMI/
  DP*
  √ Flexible design using integrated multiple I/O: MIOe to approach vertical
  applications & keep domain knowhow
  √ 2 Intel i210 GbE, rich I/O: 4COM, SATA, USB3.0, SMBus/I2
  C, GPIO full-size
  Mini PCIe w/ SIM holder, full-size mSATA or SD card
  √ Supports iManager, SUSIAccess and Embedded Software APIs

  Add to cart
• 

  MIO-6300N-S8 – SBC ATOM N2930/3LAN/VGA/12_24V

  387,00 € Excl. VAT

  Features MIO-6300N-S8:

  √Embedded Intel® Celeron® N2930 Quad-Core processor design, DDR3L 1333MHz support up to 8GB
  √ Intel Gen 7 DirectX®11.1 support, Dual Independent display: 18/24bit LVDS, VGA
  √ Intel GbE support, Rich I/O interface with 2 COM, 1 USB 3.0, 3 USB 2.0, GPIO, SMBus, I2 C
  √Supports SUSIAccess and Embedded Software APIs

  Specifications MIO-6300N-S8 :

  CPU Intel Celeron N2930
  Frequency 1.83 GHz (Quad-Core)
  L2 Cache 2 MB
  Max Turbo Frequency 2.16GHz
  System Chipset Intel Atom SoC processor integrated
  BIOS AMI EFI 64 Mbit
  Technology DDR3L 1333 MHz for N2930, DDR3L 1066 MHz for E3825
  Max. Capacity 8 GB
  Socket 1 x 204-pin SODIMM (Support 1.35V DDR3L)

  Chipset Intel Gen7 graphic engine
  Graphic Engine
  DirectX®11, Open GL3.0, Open CL 1.1, OGLES 2.0
  Encode: H.264, MPEG2
  Decode: H.264, MPEG2, VC-1, WMV9
  LVDS Supports single channel 24-bit LVDS up to 1440 x 900 at 60Hz
  VGA Supports 2560 x 1600 at 60Hz
  Dual Display Yes (LVDS+VGA)
  Speed 10/100/1000Mbps
  Controller Intel I210
  Chipset Realtek ALC888S, High Definition Audio (HD), Line-in, Line out, Mic-in

  WatchDog Timer Output System reset, Programmable counter from 1 ~ 255 minutes/ seconds

  mSATA 2 (Supports mSATA or USB interface module or full size miniPCIe, selected by BIOS, default is mSATA

  Mini PCI Express 2 x Full-size

  Power Type 12V/24V power input
  Power Supply Voltage Supports single 12V/24V input, ± 10%
  Power Consumption (Typical) MIO-6300N-S8A1E: 4.4W
  Power Consumption (Max) MIO-6300N-S8A1E: 7.0W
  Power Management ACPI
  Battery 3 V / 210 mAH

  Operation 0 ~ 60° C (32 ~ 140° F) (Operational humidity: 40° C @ 95% RH Non-Condensing)
  Non-Operation -40° C ~ 85° C and 60° C @ 95% RH non-condensing

  Dimensions (L x W) 146 x 102 mm (5.7″ x 4″)
  Weight 0.35 kg (0.77 lb), weight of total package
  Total Height Top Side: 26.9 mm (including heatsink); Bottom Side: 6.8 mm

  * Full-size Mini PCIe supports mSATA
  Note1: Default BIOS supports 64 bits OS installation, BIOS for 32 bits OS installation is supported by project.
  Note2: Passive = fanless; Active = with fan

   

  Add to cart
• 

  OPT8J 8 Port RS-422/485 DB-78 to 8XDB-9 Male Cable Kit

  50,00 € Excl. VAT

  OPT8J 8 Port RS-422/485 DB-78 to 8XDB-9 Male Cable Kit

  Add to cart
• 

  PCI-1625 – 8-Port Intelligent RS-232 Card

  365,00 € Excl. VAT

  FEATURES PCI-1625:

  √RISC processor (TMS320)
  √1 MB SRAM
  √PCI Specification 2.2 compliant
  √Speed up to 921.6 kbps
  √8-port RS-232
  √I/O address automatically assigned by PCI Plug &Play
  √OS supported: Windows 2000/XP
  √Powerful and easy to use utility (ICOM tools)
  √Link with OPT8FP peripherals up to 1200m (4000ft) from controller (RS-422)
  √Universal PCI (Supports 3.3 V or 5 V PCI bus signal)

  Add to cart
• 

  PCI-1630/422 — MultiPort Contr.Bord+ 8 RS-422

  685,00 € Excl. VAT

  Add to cart