Showing all 6 results

• 

  PCI-1625 – 8-Port Intelligent RS-232 Card

  365,00 € Excl. VAT

  FEATURES PCI-1625:

  √RISC processor (TMS320)
  √1 MB SRAM
  √PCI Specification 2.2 compliant
  √Speed up to 921.6 kbps
  √8-port RS-232
  √I/O address automatically assigned by PCI Plug &Play
  √OS supported: Windows 2000/XP
  √Powerful and easy to use utility (ICOM tools)
  √Link with OPT8FP peripherals up to 1200m (4000ft) from controller (RS-422)
  √Universal PCI (Supports 3.3 V or 5 V PCI bus signal)

  Add to cart
• 

  PCI-1733 – 32Ch.Isolated DI Card PCI BUS

  149,00 € Excl. VAT

  Features PCI-1733 :

  • 32 isolated, bidirectional digital input
  channels
  • High-voltage isolation (2,500 V DC)
  • Interrupt capacity
  • D-type connectors for isolated input
  channels
  • Reverse voltage protection for isolated
  input channels
  (up to 24 VDC)

  Add to cart
• 

  PCI-1737U – 24 Channel TTL Digital I/O Card

  93,00 € Excl. VAT

  Features PCI-1737U :

  √24 TTL digital I/O channels
  √Emulates mode 0 of 8255 PPI
  √Interrupt handling
  √Opto-22 compatible 50-pin connectors
  √Output status readback
  √PCI universal card

   

  Specifications:

  Digital Input:
  √Channels 24 (shared with output)
  √Compatibility 5 V/TTL
  √Input Voltage Logic 0: 0.8 V max.
  √Logic 1: 2.0 V min.
  √Interrupt Capable Ch. 1
  Digital Output
  √Channels 24 (shared with input)
  √Compatibility 5 V/TTL
  √Output Voltage Logic 0: 0.4 V max.
  √Logic 1: 2.4 V min.
  √Output Capability Sink: 0.4 V max. @ 24 mA
  √Source: 2.4 V min. @ 15 mA
  General
  √Bus Type PCI-1737: Universal PCI V2.2
  √PCL-724: ISA
  √I/O Connectors 50-pin male ribbon-cable connector
  √Dimensions (L x H) 175 x 100 mm (6.9″ x 3.9″)
  √Power Consumption Max: +5 V @ 294.9 mA
  √Operating Temperature 0 ~ 65° C (32 ~ 149° F)
  √Storing Temperature -25 ~ 80° C (-13 ~ 176° F)
  √Storing Humidity 5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)

  Add to cart
• 

  PCI-1753 – 96bit Digital I/O Card PCI BUS

  177,00 € Excl. VAT

  Features PCI-1753 :

   

  • 96/192 TTL digital I/O lines
  • Emulates mode 0 of 8255 PPI
  • Buffered circuits for higher driving capacity than 8255
  • Multiple-source interrupt handling
  • Interrupt output pin for simultaneously triggering external
  devices with the interrupt
  • Output status read-back
  • “Pattern match” and “Change of state” interrupt functions for
  critical I/O monitoring
  • Keeps I/O setting and digital output values when hot system
  reset
  • Supports dry contact and wet contact
  • High-density 100-pin SCSI connector

   

  Introduction PCI-1753 :

  The PCI-1753 is a 96-bit digital I/O card for the PCI bus, which can be
  extended to 192 digital I/O channels by connecting with its extension
  board, PCI-1753E. The card emulates mode 0 of the 8255 PPI chip,
  but the buffered circuits offer a higher driving capability than the 8255.
  The 96 I/O lines are divided into twelve 8-bit I/O ports: A0, B0, C0, A1,
  B1, C1, A2, B2, C2, A3, B3 and C3. Users can configure each port as
  input or output via software.
  Easy to Install: Plug and Play
  The PCI-1753 uses a PCI controller to interface the card to the PCI bus.
  The controller fully implements the PCI bus specification Rev 2.1. All
  bus relative configurations, such as base address and interrupt
  assignment, are automatically controlled by software.

  Dry Contact Support for Digital Input

  Each digital input channel of the PCI-1753/1753E accepts either 0 ~ 5
  VDC wet contact or dry contact inputs. This dry contact capability allows
  the channel to respond to changes in external circuitry (e.g., the closing
  of a switch in the external circuitry) when no voltage is present in the
  external circuit.
  Reset Protection Fulfills the True Requirement of Industrial
  Applications
  When the system is hot reset (the power is not turned off), the
  PCI-1753/1753E can either retain the value of the last I/O port settings
  and outputs, or return to its default configuration, depending on the
  jumper setting. This function protects the system from wrong operations
  during unexpected system resets.

  Interrupt Functions Ensure Faster System Response

  Two lines of each port C (i.e., ports C0, C1, C2 and C3) are connected
  to an interrupt circuit. The “Interrupt Control Register” of the
  PCI-1753/PCI-1753E controls how these signals generate an interrupt.
  Two interrupt request signals can be generated at the same time, and
  then the software can process these two request signals by ISR. The
  dual interrupt sources provide the card with more capability and flexibility.
  The PCI-1753/1753E also provides “Pattern Match” interrupt function
  for port A0. The card monitors the states of port A0 and compares
  them with a pre-set pattern. When the received state matches the preset pattern, the PCI-1753/1753E generates an interrupt signal to the
  system.
  “Change of State” interrupt function is provided at port B0. When any
  signal line of port B0 changes its state, the card generates an interrupt
  to the system to handle this event.
  These interrupt functions release the CPU from the burden of pulling all
  I/O points, enabling a PC to handle more I/O points with higher
  performance.

  Cost Savings for Increasing the Number of Input/Output Lines

  Industrial users are needing more and more digital I/O lines to transmit
  data or to monitor/control outside devices. To meet this trend and to
  satisfy user’s budget considerations, Advantech has developed an
  extension board for the PCI-1753 called the PCI-1753E. The PCI1753E has almost the same structure as the PCI-1753, without the
  interface controller. It shares PCI-1753’s interface controller through a
  10-cm flat cable connection, so users can spend less money while
  doubling the number of input/output lines.
  Accessories for PCI-1753/1753E
  The PCI-1753/1753E uses a 100-pin SCSI female connector. For easy
  signal wiring, a PCI-1753 can be connected to two ADAM-3968s by a
  100-pin to 2×68-pin SCSI cable (part number PCL-10268). The
  ADAM-3968 allows easy access for wiring the individual pins of a
  68-pin SCSI connector. An ADAM-3968/50 adapter board converts the
  68-pin connector to two opto-22 compatible 50-pin box headers
  for connecting the PCI-1753/1753E to daughterboards, such as
  PCLD-782B and PCLD-785B.

  Add to cart
• 

  PCI-1757UP – 24bit ttl Digital I/O Card Low Profile PCI BUS Card

  119,00 € Excl. VAT

  Features PCI-1757UP :

  • Low profile PCI card  PCI-1757UP
  • Universal PCI card, adapt 3.3V and 5V PCI slot
  • 24 TTL level digital I/O lines
  • Emulates mode 0 of 8255 PPI
  • Buffered circuits provide higher driving capability
  • Output status read-back
  • I/O configurable by software or on board DIP switch
  • Keeps port I/O settings and digital output states after hot reset
  • Board ID set by DIP switch
  • High density D-SUB 25-pin connector

  Introduction:

  The PCI-1757UP is a 24-bit DI/O 1low profile PCI card. It meets the PCI
  standard REV.2.2 (universal PCI expansion card), and works with both
  3.3V and 5V PCI slot. It provides users with 24 bits of parallel digital
  input/output, emulates mode 0 of the 8255 PPI chip, but the buffered
  circuits offer a higher driving capability than the 8255.

  Specifications PCI-1757UP :

  Digital Input
  • Logic High Voltage: 2.0 to 5.25 V
  • Logic Low Voltage: 0.0 to 0.80 V
  • High Level Input Current: 20 mA
  • Low Level Input Current: -0.2 mA
  Digital Output
  • Logic High Voltage: 2.4 V minimum
  • Logic Low Voltage: 0.4 V maximum
  • High Level Input Current: 15 mA maximum (source)
  • Low Level Input Current: 24 mA maximum (sink)
  • Driving Capability: 15 LS TTL
  Interrupt Source
  • PC0, PC4
  General
  • Connector: one D-SUB 25-pin female connector
  • Power Consumption: 5 V @ 140 mA (Typical)
  • Operating Temperature: 0 ~ 70° C (32° F ~ 158° F)
  • Storage Temperature: -20 ~ 80° C (-4° F ~ 176° F)
  • Humidity: 5% ~ 95% non-condensing

  • Dimension: 119.91 x 64.41 mm (4.721″ x 2.536″) Low profile PCI
  MD1 card size

  Ordering Information
  ❑ PCI-1757UP
  24-channel Digital Input/Output Card
  ❑ ADAM-3925
  DB-25 wiring terminal for DIN-rail mounting

  Add to cart
• 

  PCI-1763UP – 8 Channel Relay & 8 Channel Isolated DI Card

  212,00 € Excl. VAT

  Features PCI-1763UP

  √8 relay output channels and 8 isolated digital input channels
  √LED indicators to show activated relays
  √8 Form C type relay output channels
  √Output status read-back
  √Retained relay output values when hot system reset
  √High-voltage isolation on input channels (2,500 VDC)
  √High ESD protection (2,000 VDC)
  √High over-voltage protection (70 VDC)
  √Wide input range (10 ~ 50 VDC)
  √Interrupt handling capability
  √Support Universal PCI Bus
  √Low Profile PCI card
  √BoardID™ switch PCI-1763UP

  Introduction

  PCI-1763UP relay actuator and isolated digital input card is an add-on card for the PCI bus. It provides 8 optically-isolated digital inputs with isolation protection of 2500 VDC for
  collecting digital inputs in noisy environments, and 8 relay actuators for serving as on/off control devices or small power switches. For easy monitoring, each relay is equipped with
  one red LED to show its on/off status. PCI-1763UP’s eight optically-isolated digital input channels are ideal for digital input in noisy environments or with floating potentials. The low
  profile PCI form factor and universal PCI connector (V2.2 compliant), meet requirements for size and reduced power consumption.

  Specifications PCI-1763UP:

  Isolated Digital Input
  Channels 8
  Input Voltage Logic 0: 3 V max.
  Logic 1: 10 V min. (50 V max.)
  Input Current 3.16 mA @ 10 VDC
  17.3 mA @ 50 VDC
  Interrupt Capable Ch. 8
  Isolation Protection 2,500 VDC
  Overvoltage Protection 70 VDC
  Opto-isolator Response 25 µs
  Input Resistance 2.8 KΩ
  Relay Output
  Channels 8
  Relay Type DPDT, Form C
  Contact Rating 240 VAC @ 0.25 A, or 30 VDC @ 1 A
  Relay on Time 5 ms max.
  Relay off Time 4 ms max.
  Life Span 1 x 10^7 @ 6 V/100 mA
  Resistance Contact: < 50 mΩ
  Insulation: 1 GΩ min. (at 500 VDC)

  General
  I/O Connector Type DB44 female
  Dimensions 119.91 x 64.41 mm (Low-Profile MD1)
  Power Consumption +5V @ 107.5 mA (typical)
  +5V @ 301.3 mA (max.)
  Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1,2)
  Storing Temperature -20 ~ 70° C (-4 ~158° F)
  Storing Humidity 5 ~ 95 % RH, non-condensing (refer to IEC 68-2-3)

  Ordering Information
  PCI-1763UP Low-profile 8-ch Relay/Isolated DI Card
  PCL-10144-1 DB 44-pin cable, 1 m
  ADAM-3944 DB-44 Wiring Terminal for DIN-rail mounting

  Add to cart