Showing 11–12 of 12 results

• 

  PCI-1763UP – 8 Channel Relay & 8 Channel Isolated DI Card

  212,00 € Excl. VAT

  Features PCI-1763UP

  √8 relay output channels and 8 isolated digital input channels
  √LED indicators to show activated relays
  √8 Form C type relay output channels
  √Output status read-back
  √Retained relay output values when hot system reset
  √High-voltage isolation on input channels (2,500 VDC)
  √High ESD protection (2,000 VDC)
  √High over-voltage protection (70 VDC)
  √Wide input range (10 ~ 50 VDC)
  √Interrupt handling capability
  √Support Universal PCI Bus
  √Low Profile PCI card
  √BoardID™ switch PCI-1763UP

  Introduction

  PCI-1763UP relay actuator and isolated digital input card is an add-on card for the PCI bus. It provides 8 optically-isolated digital inputs with isolation protection of 2500 VDC for
  collecting digital inputs in noisy environments, and 8 relay actuators for serving as on/off control devices or small power switches. For easy monitoring, each relay is equipped with
  one red LED to show its on/off status. PCI-1763UP’s eight optically-isolated digital input channels are ideal for digital input in noisy environments or with floating potentials. The low
  profile PCI form factor and universal PCI connector (V2.2 compliant), meet requirements for size and reduced power consumption.

  Specifications PCI-1763UP:

  Isolated Digital Input
  Channels 8
  Input Voltage Logic 0: 3 V max.
  Logic 1: 10 V min. (50 V max.)
  Input Current 3.16 mA @ 10 VDC
  17.3 mA @ 50 VDC
  Interrupt Capable Ch. 8
  Isolation Protection 2,500 VDC
  Overvoltage Protection 70 VDC
  Opto-isolator Response 25 µs
  Input Resistance 2.8 KΩ
  Relay Output
  Channels 8
  Relay Type DPDT, Form C
  Contact Rating 240 VAC @ 0.25 A, or 30 VDC @ 1 A
  Relay on Time 5 ms max.
  Relay off Time 4 ms max.
  Life Span 1 x 10^7 @ 6 V/100 mA
  Resistance Contact: < 50 mΩ
  Insulation: 1 GΩ min. (at 500 VDC)

  General
  I/O Connector Type DB44 female
  Dimensions 119.91 x 64.41 mm (Low-Profile MD1)
  Power Consumption +5V @ 107.5 mA (typical)
  +5V @ 301.3 mA (max.)
  Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1,2)
  Storing Temperature -20 ~ 70° C (-4 ~158° F)
  Storing Humidity 5 ~ 95 % RH, non-condensing (refer to IEC 68-2-3)

  Ordering Information
  PCI-1763UP Low-profile 8-ch Relay/Isolated DI Card
  PCL-10144-1 DB 44-pin cable, 1 m
  ADAM-3944 DB-44 Wiring Terminal for DIN-rail mounting

  Add to cart
• 

  PCL-757 – ISA-BUS SWITCH/EXTENSION

  248,00 € Excl. VAT

  INTRODUCTION

  Thank you for purchasing the PCL-757–our latest ISA bus
  switch/extension card.This versatile extension card is an ideal
  solution for prototype development, and troubleshooting and testing
  PC add-on cards.We hope you will find this tool very useful, and
  easy to use.
  The PCL-757 is an ISA bus switch/extension card that extends the
  bus signals of the IBM PC/XT/AT(and its compatibles) to a wide
  variety of PC add-on and prototype cards that can be plugged into
  its 16-bit expansion slot(most 8-bit, XT-type cards may be used as
  well).
  Also, with the PCL-757, you can now reset your system’s CPU or
  initialize an I/O interface card via an on-board reset switch.
  The following information is a list of the PCL-757’s additional
  features:
  * All ISA bus signals are buffered
  * Easy access toggle switch for ON/OFF control of system bus signals
  *Completely hardware and software transparent
  *Replaceable +5V and +12V fuses for hardware protection
  *LED lamps for ON/OFF and fuse quality indication
  *+5v and +12V power connectors for external usage

  Add to cart