Vendor Advantech AE.
Showing 1–10 of 12 results
-
ADAM-3021 -DC Output Signal Cond. Module
127,00 € Excl. VATAdd to cartSpecifications
Voltage Output Mode
Input Output
±5 V,±10 V ±10V
Current Output Mode
Input Output
0-5 V, 0-10 V 0-20 mA
1-5 V, 2-10 V 4-20 mAGeneral
• Input Bandwidth: 1KHz
• Isolation (three way): 1000 Voc
• Output Impedance: <5052
• Current Load Resistor: 0 to 5000 (source)
• Accuracy: ±0.1% of full range (typical)
• Stability (temperature drift): ±177.7 iN/°C
• Common Mode Rejection: 100 dB @ 50 Hz/60 Hz
price for any signal conditioner or in-house design.
• Operating Temperature: -10 to 70°C
Power
• Range: 24 Voc ±10%
• Consumption: 0.85 W -
ADAM-3950-AE, 50-pin Flat Cable Wiring Terminal for DIN-rail Mounting
68,00 € Excl. VATAdd to cartThe ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
- Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with 50-pin flat cable connector
- Case dimensions (W x L x H): 77.5 x 146.3 x 51 mm (3.1″ x 5.8″ x 2.0″)
- To Be Used With USB-4751/L, PCI-1737U, PCI-1739U, PCL-722, PCL-724, PCL-731
-
ADAM-4910DIO-Digital I/O MOD.CARRIER B.PLAN
128,00 € Excl. VATAdd to cartADAM-4910-DIO Digital i/o module carrier backplane
-
ADAM-5090-4-Port RS-232 Module
120,00 € Excl. VATAdd to cart- Ports: 4 serial ports
- Provide 128 byte FIFO
- Comm. Speed up to 115.2 Kbps
- Data signals: T x D, R x D, RTS, CTS,DTR, DSR, DCD, RI, GND
- Connector: RJ-45
- LED display: TX, RX
- For ADAM-5510, ADAM-5511 only
-
OPT8J 8 Port RS-422/485 DB-78 to 8XDB-9 Male Cable Kit
50,00 € Excl. VATAdd to cartOPT8J 8 Port RS-422/485 DB-78 to 8XDB-9 Male Cable Kit
-
PCI-1625 – 8-Port Intelligent RS-232 Card
365,00 € Excl. VATAdd to cartFEATURES PCI-1625:
√RISC processor (TMS320)
√1 MB SRAM
√PCI Specification 2.2 compliant
√Speed up to 921.6 kbps
√8-port RS-232
√I/O address automatically assigned by PCI Plug &Play
√OS supported: Windows 2000/XP
√Powerful and easy to use utility (ICOM tools)
√Link with OPT8FP peripherals up to 1200m (4000ft) from controller (RS-422)
√Universal PCI (Supports 3.3 V or 5 V PCI bus signal) -
PCI-1733 – 32Ch.Isolated DI Card PCI BUS
149,00 € Excl. VATAdd to cartFeatures PCI-1733 :
• 32 isolated, bidirectional digital input
channels
• High-voltage isolation (2,500 V DC)
• Interrupt capacity
• D-type connectors for isolated input
channels
• Reverse voltage protection for isolated
input channels
(up to 24 VDC) -
PCI-1737U – 24 Channel TTL Digital I/O Card
93,00 € Excl. VATAdd to cartFeatures PCI-1737U :
√24 TTL digital I/O channels
√Emulates mode 0 of 8255 PPI
√Interrupt handling
√Opto-22 compatible 50-pin connectors
√Output status readback
√PCI universal cardSpecifications:
Digital Input:
√Channels 24 (shared with output)
√Compatibility 5 V/TTL
√Input Voltage Logic 0: 0.8 V max.
√Logic 1: 2.0 V min.
√Interrupt Capable Ch. 1
Digital Output
√Channels 24 (shared with input)
√Compatibility 5 V/TTL
√Output Voltage Logic 0: 0.4 V max.
√Logic 1: 2.4 V min.
√Output Capability Sink: 0.4 V max. @ 24 mA
√Source: 2.4 V min. @ 15 mA
General
√Bus Type PCI-1737: Universal PCI V2.2
√PCL-724: ISA
√I/O Connectors 50-pin male ribbon-cable connector
√Dimensions (L x H) 175 x 100 mm (6.9″ x 3.9″)
√Power Consumption Max: +5 V @ 294.9 mA
√Operating Temperature 0 ~ 65° C (32 ~ 149° F)
√Storing Temperature -25 ~ 80° C (-13 ~ 176° F)
√Storing Humidity 5 ~ 95% RH, non-condensing (refer to IEC 68-2-3) -
PCI-1753 – 96bit Digital I/O Card PCI BUS
177,00 € Excl. VATAdd to cartFeatures PCI-1753 :
• 96/192 TTL digital I/O lines
• Emulates mode 0 of 8255 PPI
• Buffered circuits for higher driving capacity than 8255
• Multiple-source interrupt handling
• Interrupt output pin for simultaneously triggering external
devices with the interrupt
• Output status read-back
• “Pattern match” and “Change of state” interrupt functions for
critical I/O monitoring
• Keeps I/O setting and digital output values when hot system
reset
• Supports dry contact and wet contact
• High-density 100-pin SCSI connectorIntroduction PCI-1753 :
The PCI-1753 is a 96-bit digital I/O card for the PCI bus, which can be
extended to 192 digital I/O channels by connecting with its extension
board, PCI-1753E. The card emulates mode 0 of the 8255 PPI chip,
but the buffered circuits offer a higher driving capability than the 8255.
The 96 I/O lines are divided into twelve 8-bit I/O ports: A0, B0, C0, A1,
B1, C1, A2, B2, C2, A3, B3 and C3. Users can configure each port as
input or output via software.
Easy to Install: Plug and Play
The PCI-1753 uses a PCI controller to interface the card to the PCI bus.
The controller fully implements the PCI bus specification Rev 2.1. All
bus relative configurations, such as base address and interrupt
assignment, are automatically controlled by software.Dry Contact Support for Digital Input
Each digital input channel of the PCI-1753/1753E accepts either 0 ~ 5
VDC wet contact or dry contact inputs. This dry contact capability allows
the channel to respond to changes in external circuitry (e.g., the closing
of a switch in the external circuitry) when no voltage is present in the
external circuit.
Reset Protection Fulfills the True Requirement of Industrial
Applications
When the system is hot reset (the power is not turned off), the
PCI-1753/1753E can either retain the value of the last I/O port settings
and outputs, or return to its default configuration, depending on the
jumper setting. This function protects the system from wrong operations
during unexpected system resets.Interrupt Functions Ensure Faster System Response
Two lines of each port C (i.e., ports C0, C1, C2 and C3) are connected
to an interrupt circuit. The “Interrupt Control Register” of the
PCI-1753/PCI-1753E controls how these signals generate an interrupt.
Two interrupt request signals can be generated at the same time, and
then the software can process these two request signals by ISR. The
dual interrupt sources provide the card with more capability and flexibility.
The PCI-1753/1753E also provides “Pattern Match” interrupt function
for port A0. The card monitors the states of port A0 and compares
them with a pre-set pattern. When the received state matches the preset pattern, the PCI-1753/1753E generates an interrupt signal to the
system.
“Change of State” interrupt function is provided at port B0. When any
signal line of port B0 changes its state, the card generates an interrupt
to the system to handle this event.
These interrupt functions release the CPU from the burden of pulling all
I/O points, enabling a PC to handle more I/O points with higher
performance.Cost Savings for Increasing the Number of Input/Output Lines
Industrial users are needing more and more digital I/O lines to transmit
data or to monitor/control outside devices. To meet this trend and to
satisfy user’s budget considerations, Advantech has developed an
extension board for the PCI-1753 called the PCI-1753E. The PCI1753E has almost the same structure as the PCI-1753, without the
interface controller. It shares PCI-1753’s interface controller through a
10-cm flat cable connection, so users can spend less money while
doubling the number of input/output lines.
Accessories for PCI-1753/1753E
The PCI-1753/1753E uses a 100-pin SCSI female connector. For easy
signal wiring, a PCI-1753 can be connected to two ADAM-3968s by a
100-pin to 2×68-pin SCSI cable (part number PCL-10268). The
ADAM-3968 allows easy access for wiring the individual pins of a
68-pin SCSI connector. An ADAM-3968/50 adapter board converts the
68-pin connector to two opto-22 compatible 50-pin box headers
for connecting the PCI-1753/1753E to daughterboards, such as
PCLD-782B and PCLD-785B. -
PCI-1757UP – 24bit ttl Digital I/O Card Low Profile PCI BUS Card
119,00 € Excl. VATAdd to cartFeatures PCI-1757UP :
• Low profile PCI card PCI-1757UP
• Universal PCI card, adapt 3.3V and 5V PCI slot
• 24 TTL level digital I/O lines
• Emulates mode 0 of 8255 PPI
• Buffered circuits provide higher driving capability
• Output status read-back
• I/O configurable by software or on board DIP switch
• Keeps port I/O settings and digital output states after hot reset
• Board ID set by DIP switch
• High density D-SUB 25-pin connectorIntroduction:
The PCI-1757UP is a 24-bit DI/O 1low profile PCI card. It meets the PCI
standard REV.2.2 (universal PCI expansion card), and works with both
3.3V and 5V PCI slot. It provides users with 24 bits of parallel digital
input/output, emulates mode 0 of the 8255 PPI chip, but the buffered
circuits offer a higher driving capability than the 8255.Specifications PCI-1757UP :
Digital Input
• Logic High Voltage: 2.0 to 5.25 V
• Logic Low Voltage: 0.0 to 0.80 V
• High Level Input Current: 20 mA
• Low Level Input Current: -0.2 mA
Digital Output
• Logic High Voltage: 2.4 V minimum
• Logic Low Voltage: 0.4 V maximum
• High Level Input Current: 15 mA maximum (source)
• Low Level Input Current: 24 mA maximum (sink)
• Driving Capability: 15 LS TTL
Interrupt Source
• PC0, PC4
General
• Connector: one D-SUB 25-pin female connector
• Power Consumption: 5 V @ 140 mA (Typical)
• Operating Temperature: 0 ~ 70° C (32° F ~ 158° F)
• Storage Temperature: -20 ~ 80° C (-4° F ~ 176° F)
• Humidity: 5% ~ 95% non-condensing• Dimension: 119.91 x 64.41 mm (4.721″ x 2.536″) Low profile PCI
MD1 card sizeOrdering Information
❑ PCI-1757UP
24-channel Digital Input/Output Card
❑ ADAM-3925
DB-25 wiring terminal for DIN-rail mounting
