Vendor Advantech AE.
Showing 11–20 of 24 results
-
PCL-813B – 32 Ch.AD S.E Isolated A/D Card
533,00 € Excl. VATAdd to cartFeatures PCL-813B:
√32 single-ended analog input channels PCL-813B
√12-bit A/D converter, with up to 100 kHz sampling rate
√Isolation protection (500 VDC)
√Program-controlled A/D trigger and data transferIntroduction :
PCL-813B is a 12-bit 32-channel analog input card that offers high-voltage isolation on each analog input. It is an extremely cost effective solution for applications in industrial
measurement and monitoring. The card offers 32 analog input channels with software programmable gain on each channel and two DC-to-DC converters on a 4-layer PCB with an
integral ground plane. Optically-isolated inputs provide over 500 VDC of isolation between the analog inputs and the PC, protecting the PC and peripherals from damage due to high
voltages on the input lines. PCL-813B is ideal for situations where the budget-conscious user requires flexibility, stability and a high level of isolation protection. PCL-813B comes
with the PCLD-881 wiring terminal board and a DB-37 cable assembly.Specifications PCL-813B:
Analog Input
Channels 32 single-ended
Resolution 12 bits,
Max. Sampling Rate 25 kHz
Overvoltage Protection Continuous ±30 V (max.)
Isolation Protection 500 VDC from analog input to PC
Input Impedance > 10 MΩ
Sampling Modes software trigger
Input Range (V)General:
Bus Type ISA
I/O Connectors 1 x DB37-F
Dimensions (L x H) 219 x 100 mm (8.6″ x 3.9″)
Power Consumption +5 V @ 660 mA max.
+12 V @ 140 mA max.
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storing Temperature -20 ~ 65° C (-4 ~ 149° F)
Storing Humidity 5 ~ 95% RH non-condensing (refer to IEC 68-2-3) -
PCL-839 – HIGH SPEED STEP MOTOR CONTROL.
576,00 € Excl. VATAdd to cartIntroduction
PCL-839 is a high-speed three-axis stepping motor control card that
simplifies stepping motor control, giving you added performance from
your stepping motors.Three-axis control
The PCL-839 has three single-chip pulse generators on-board, which
enables the simultaneous and independent control of three axis. The
PCL-839 provides digital pulse and directional control (+ and -) for each
stepping motor axis.User-friendly interface
The PCL-839 has been designed to act as a user-friendly solution for
your stepping motor control applications. Programming the PCL-839 is
very easy. ‘C’ Libraries are provided and they contain all the command
functions needed for total control of your stepping motors.Stand-alone interpreter
A stand-alone, non-resident command interpreter, PROGg39.EXE, can
also be used to control your stepping motors without any programming.
Digital I/O
The PCL-839 features 16 digital inputs and 16 digital outputs for general
I/O use (on/off control etc.).
Isolation protection
The PCL-839’s PULSE and DIRECTION outputs and five limits input
switches are isolated from the PC side.Features of PCL-839 :
· Three on-board pulse generators that enables simultaneous independent
control of three stepping motors
· Two operating modes – two-pulse (+ and – direction pulse) or one-pulse
(pulse-direction) mode
· Programmable step rate from 1 to 16k pps (pulses per second).
· Programmable initial speed, final speed and time duration. Automatic
trapezoidal acceleration/deceleration Tamping is performed
· 16 I/O TTL compatible channels
· All inputs/outputs are optically isolated, providing 500VDC isolation
protection
· ‘C’ libraries containing device drivers provided
· Command Interpreter provided that eases learning the PCL-839 command
setApplications
· Precise X-Y-Z position control
· Precise rotation control
· Robotics and assembly equipment
· Other stepping-motor applicationsGeneral
· Power consumption: 300mA, +5VDC
· Connector: 37-pin D-type connector
· Board dimensions: 183.5 mm x 99.06 mm
· Operatingtemperature:0 to70°C -
PCL-846A – 4 Port RS-422/485 Card Isolat.
274,00 € Excl. VATAdd to cartFeatures PCL-846A: √Four or eight RS-232 or RS-422/485 serial ports PCL-846A √Transmission speeds up to 921.6 kbps √Independent/shared IRQ settings between each of the 4 serial ports √Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15 √Supports COM1, COM2, COM3, and COM4 √Provides 1000 VDC isolation (PCL-846 only) √Provides …
-
PCL-M10 – 3M – Industrial Accelerometer, 80mV/g
252,00 € Excl. VATAdd to cartIndustrial Accelerometer Sensitivity: ±80 mV/g Sensing Range: 1~10kHz Direct connection with WISE-750
-
PCLD – 7216 – I/O MODULE CARR.BORD 16CH.
175,00 € Excl. VATAdd to cartFeatures Optically isolated inputs and outputs between computer and field devices Channel status reflected by on-board LED for easy monitoring On-board fuse protection Specifications
-
PCLD – 774 – Analog Expansion Board
110,00 € Excl. VATAdd to cartFEATURES •Supports all PCL-series DA&C cards •Supports all PCLD-series signal conditioning daughter boards • Up to 4 PCLD-779s can be connected at one time to maximize the temperature measurement capacity •D-37 connector for PCL-814 to interface PCLD-series signal conditioning board • Additional screw terminal block for signal wiring and monitoring • Auto-lock. 20-pin header connectors …
-
PCLD-7115 -WIRING TERM. Board FOR PCL-711
46,00 € Excl. VATAdd to cartDescription: PCLD-7115 DISCONTINUED BY MANUFACTURER WIRING TERMINAL BOARD FOR PCL-711 20 PIN
-
PCLD-782 – OPTO-Isolated D/I Board 16CH
176,00 € Excl. VATAdd to cart16-ch Opto-Isolated Digital Input Board Compatible with all PC-LabCard products with DI channels. See specifications for details. 16 or 24 optically-isolated digital input channels Built-in screw terminals for easy input wiring LEDs indicate input logic status Inputs buffered with voltage comparators
-
PCLD-782B – 24-ch Opto-Isolated Digital Input Board
207,00 € Excl. VATAdd to cart16-ch Opto-Isolated Digital Input Board Compatible with all PC-LabCard™ products with DI channels on either 20-pin flat cable or 50-pin Opto-22 compatible connectors 24 optically-isolated digital input channels Built-in screw terminals for easy input wiring LEDs indicate input logic status Inputs buffered with voltage comparators
-
PCLD-8115 – WIRING TERMINAL Board FOR 818L
104,00 € Excl. VATAdd to cartIndustrial Wiring Terminal Board with CJC Circuit Low-cost screw-terminal boards Onboard CJC (Cold Junction Compensation) circuits for direct thermocouple measurement. Reserved space for signal-conditioning circuits, such as a low-pass filter, and more. Industrial-grade screw-clamp terminal blocks for heavy-duty and reliable connections. Supports PCL-818 series multifunction cards Nylon standoffs, screws and washers included for easy mounting …
