Vendor Advantech AE.
Showing all 7 results
-
AWS-825P
2.650,00 € Excl. VATAdd to cartFeatures of AWS-825P:
√9-slot, 15″ TFT LCD workstation AWS-825P
√Resolution: 1024 x 768
√Two-piece design: integrated or separated LCD panel & control chassis
√Built-in touchpad, USB port and floppy drive on front panel
√Designed for simple maintenance with hinged rear door for easy access
√Vibration protection up to 1G
√Heavy-duty stainless steel chassis with aluminum front panel
√Hard anodic coating to prevent panel abrasion and acid corrosion
√Front panel is NEMA4/IP65 compliant AWS-825PSpecifications:
General
Button Controls
Membrane Keypad 1 39 operating keys
Membrane Keypad 2 10 function keys
10 programmable macro function keys
OSD On front panel with backlight on/off switch
Touchpad On front panel
Certifications BSMI, CE, CCC, and FCC class A
Connectors 1 x front-accessible 6-pin PS/2 with dust-protection door for keyboard
Cooling System 1 x 86 CFM fan
Dimensions (W x H x D) 482 x 356 x 229 mm (18.98″ x 14.0″ x 9″)
Enclosure Aluminum
Disk Drive Bay Supports one 3.5″ FDD, one 3.5″ HDD & one slim CD-ROM (HDD and CD-ROM optional)
LED Indicators Power on/off and HDD activity
Mounting 19″ rack
LCD Display
Backlight Life 50,000 hours
Display Size 15″
Display Type XGA TFT LCD
Luminance 350 cd/m2
Max. Colors 262 K
Max. Resolution 1024 x 768
Viewing Angle (H/V°) 120/100Introduction AWS-825P :
AWS-8259 is an industrial workstation with 9-slot expansion capability. Featuring a 15″ detachable display module, the AWS-8259 has a rugged yet flexible design for factory floor
applications. Its 15″ high-brightness 1024 x 768 LCD fulfills the needs for large information viewing. In addition, the display module can be easily separated for maintenance.
With waterproof character keypads & touchpad features, an additional keyboard or mouse is not needed for operation. The standard 8U size can easily be installed in either racks or
mounted in panels. -
PCI-1730 – 32Ch.Isolated DIO Card PCI BUS
171,00 € Excl. VATAdd to cartFeatures PCI-1730 :
√ISA-Compatible with PCL-730/733/734
√32-ch Isolated DI/O (16 inputs and 16 outputs)
√32-ch TTL Isolated DI/O (16 inputs and 16 outputs)
√High output driving capacity
√Interrupt capability
√Two 20-pin connectors for isolated digital I/O channels and two for TTL
digital I/O channels
√D-type connector for isolated input and output channels
√High-voltage isolation on output channels -
PCI-7032F-00
401,00 € Excl. VATAdd to cartFeatures PCI-7032F-00:
√ Ultra low power Intel® Celeron processor J1900/N2930, VG SKU is fan-less
design pci-7032f-00
√ Dual channel DDR3L 1066/1333 on 204-pin SO-DIMM socket
√ Dual independent display
√ Up to 2 GbE LAN
√ 2 SATA 2.0 (300 MB/s), one of them can be configured as m-SATA
√ Legacy I/O: 4 RS-232/422/485, and 1 LPT supportInterface 10/100/1000 Mbps
Controller LAN1: Intel I211
LAN2: Intel I211 (G2, F)
Connector RJ-45 with LED Connector x 2 -
PCL-813B – 32 Ch.AD S.E Isolated A/D Card
533,00 € Excl. VATAdd to cartFeatures PCL-813B:
√32 single-ended analog input channels PCL-813B
√12-bit A/D converter, with up to 100 kHz sampling rate
√Isolation protection (500 VDC)
√Program-controlled A/D trigger and data transferIntroduction :
PCL-813B is a 12-bit 32-channel analog input card that offers high-voltage isolation on each analog input. It is an extremely cost effective solution for applications in industrial
measurement and monitoring. The card offers 32 analog input channels with software programmable gain on each channel and two DC-to-DC converters on a 4-layer PCB with an
integral ground plane. Optically-isolated inputs provide over 500 VDC of isolation between the analog inputs and the PC, protecting the PC and peripherals from damage due to high
voltages on the input lines. PCL-813B is ideal for situations where the budget-conscious user requires flexibility, stability and a high level of isolation protection. PCL-813B comes
with the PCLD-881 wiring terminal board and a DB-37 cable assembly.Specifications PCL-813B:
Analog Input
Channels 32 single-ended
Resolution 12 bits,
Max. Sampling Rate 25 kHz
Overvoltage Protection Continuous ±30 V (max.)
Isolation Protection 500 VDC from analog input to PC
Input Impedance > 10 MΩ
Sampling Modes software trigger
Input Range (V)General:
Bus Type ISA
I/O Connectors 1 x DB37-F
Dimensions (L x H) 219 x 100 mm (8.6″ x 3.9″)
Power Consumption +5 V @ 660 mA max.
+12 V @ 140 mA max.
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storing Temperature -20 ~ 65° C (-4 ~ 149° F)
Storing Humidity 5 ~ 95% RH non-condensing (refer to IEC 68-2-3) -
PCL-839 – HIGH SPEED STEP MOTOR CONTROL.
576,00 € Excl. VATAdd to cartIntroduction
PCL-839 is a high-speed three-axis stepping motor control card that
simplifies stepping motor control, giving you added performance from
your stepping motors.Three-axis control
The PCL-839 has three single-chip pulse generators on-board, which
enables the simultaneous and independent control of three axis. The
PCL-839 provides digital pulse and directional control (+ and -) for each
stepping motor axis.User-friendly interface
The PCL-839 has been designed to act as a user-friendly solution for
your stepping motor control applications. Programming the PCL-839 is
very easy. ‘C’ Libraries are provided and they contain all the command
functions needed for total control of your stepping motors.Stand-alone interpreter
A stand-alone, non-resident command interpreter, PROGg39.EXE, can
also be used to control your stepping motors without any programming.
Digital I/O
The PCL-839 features 16 digital inputs and 16 digital outputs for general
I/O use (on/off control etc.).
Isolation protection
The PCL-839’s PULSE and DIRECTION outputs and five limits input
switches are isolated from the PC side.Features of PCL-839 :
· Three on-board pulse generators that enables simultaneous independent
control of three stepping motors
· Two operating modes – two-pulse (+ and – direction pulse) or one-pulse
(pulse-direction) mode
· Programmable step rate from 1 to 16k pps (pulses per second).
· Programmable initial speed, final speed and time duration. Automatic
trapezoidal acceleration/deceleration Tamping is performed
· 16 I/O TTL compatible channels
· All inputs/outputs are optically isolated, providing 500VDC isolation
protection
· ‘C’ libraries containing device drivers provided
· Command Interpreter provided that eases learning the PCL-839 command
setApplications
· Precise X-Y-Z position control
· Precise rotation control
· Robotics and assembly equipment
· Other stepping-motor applicationsGeneral
· Power consumption: 300mA, +5VDC
· Connector: 37-pin D-type connector
· Board dimensions: 183.5 mm x 99.06 mm
· Operatingtemperature:0 to70°C -
PCL-846A – 4 Port RS-422/485 Card Isolat.
274,00 € Excl. VATAdd to cartFeatures PCL-846A: √Four or eight RS-232 or RS-422/485 serial ports PCL-846A √Transmission speeds up to 921.6 kbps √Independent/shared IRQ settings between each of the 4 serial ports √Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15 √Supports COM1, COM2, COM3, and COM4 √Provides 1000 VDC isolation (PCL-846 only) √Provides …
-
POC-174CB-AC- A Point-of-Care Terminal
860,00 € – 882,00 € Excl. VATSelect optionsThe POC-174 is a medical-grade Point-of Care Panel PC with a 17” display optimized for minimal power leakage and low EMI. It is approved according to EN60601-1 and UL2601-1 standards. This certifies that there is no interference with medical equipment that can pose a health risk for patients. The POC-174 has also been also approved with IP65/NEMA 4 and IPX1 for dust-resistance and water spills. Like the other products in the POC series, the POC-174 has all the characteristics needed for use in critical medical environments. Its high brightness, resolution, and contrast ratio LCD display is especially suitable for medical diagnosis and treatment methods like: CT diagnosis, electrical X-ray, PACS and DICOM. With a wide range of I/O options, the POC series supply full connectivity, and offer the most secure and practical healthcare terminals for patients and practitioners.
Manufacturer’s warranty has expired.
Specifications POC-174CB-AC-
General
§ Dimension (W x H x D) 437 x 377 x 131 mm (17.20″ x 14.84″ x 5.15″)
§ Weight 12 kg (26.5 lb)
§ Power Supply AC model: 180 watt
Input voltage: 100 ~ 240 VAC, 4 A max.@ 50 ~ 60 Hz
Output voltages: +5 V @ 12 A, +12 V @ 12 A
+3.3 V @ 16.8 A, +5 Vsb @ 2.0 A, -12 V @ 0.8 A DC model:
Input voltage: +24 VDC, 7.5 A max
Output voltage: +5 V @ 10 A, +12 V @ 4 A,
-12 V @ 1 A, +3.3 V @ 8 A, +5 Vsb @ 0.75 A
§ Cooling Fan (L x W x H) 60 x 60 x 10 mm (2.4″ x 2.4″ x 2.4″)
§ Front Panel IP65/NEMA compliant
Standard PC Functions
§ CPU Intel® Pentium® 4 Mobile
§ Memory 2 x 184-pin DIMM socket accepts up to 2 GB DDR333/266 DRAM 1GB installed)
§ HDD 1 x 2.5″ IDE HDD
§ FDD 1.44 MB
§ CD ROM Slim type (Optional: CD-RW/DVD-ROM)
§ PCMCIA 2x Type II
§ I/O Ports &Speakers 4 x Serial ports: 3 x RS-232, 1 x RS-232/422/485;
1 x Parallel port
2 x USB ports
1 x PS/2 mouse and keyboard interface
1x Mic-in
1 x Line-in
1 x Speaker-out
2 x 1 W speakers
§ Network (LAN) 2 x 10/100Base-T Ethernet interface
§ Bus Expansion 1 x PCI 2.2 expansion slot
§ Optional 802.11b wireless antenna with wireless LAN PCMCIA module
Display Specifications
§ Display Type 17″ TFT LCD
§ Max.Resolution 1280 x 1024
§ Colors 16.7 M (8 bits/color)
§ Dot Size (mm) 0.264 x 0.264
§ Viewing Angle 170°
§ Luminance 250 cd/m2
§ Contrast Ratio 600 : 1
§ LCD MTBF 50,000 hours
§ Backlight Lifetime 40,000 hours
Specifications Cont.
Environmental Specifications
§ Temperature 0 ~ 40° C
§ Relative Humidity 10 ~ 95% @ 40° C (non-condensing)
§ Shock 50 G peak acceleration (11 msec duration)
§ Power MTBF 100,000 hrs
§ Certifications CE, FCC, VCCI, BSMI approved
§ AC Model UL60950, UL60601-1, EN60950, EN60601-1 approved
§ DC Model FCC, UL60601-1, EN60601-1 approved
Mounting
- Vesa 75 x 75 mm, 100 x 100 mm
