PCL-847B – 4 Port RS-422/485 Card SurgeP
230,00 € Excl. VAT
Features PCL-847B:
• Four independent RS-422/485 serial ports PCL-847B
• Transmission speeds up to 921.6 Kbps
• Independent/shared IRQ settings between each of the 4 serial ports
• Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15
• Supports standard DOS COM1, COM2, COM3, and COM4
• Supports DOS/Windows 3.1 (PC-ComLIB), Windows 95/98,
Windows NT (ICOM Utility)
• Provides 1000 VDC isolation (PCL-846A/846B only)
• Provides 3000 VDC surge protection (PCL-846B/847B)
• Space reserved for termination resistors
• Supports 2 wire or 4 wire operation
• Supports Tx, Rx, RTS, and CTS signals
• Automatic RS-485 data flow control or RTS control
Introduction PCL-847B:
PCL-846/847 series cards provide four independent RS-422/485
serial ports on a card. Each port has a 16C550 UART with an on-chip
16-byte FIFO buffer for reliable, high-speed serial I/O. The UART
buffers data into 16-byte packets before putting it on the bus. This
drastically reduces the CPU load and avoids data loss when the
system is busy and cannot process the interrupt quickly. The UART
is especially useful for high speed serial I/O under Windows.
PCL-846 cards differ from PCL-847 cards in that they utilize
on-board optical isolators to protect your PC and equipment against
damage from ground loops, increasing system reliability in harsh
environments. To further increase reliability, PCL-846B/847B cards
include surge protection technology, protecting your system from
abrupt high voltage surges (up to 3000 V) such as those caused by
lightning during thunderstorms.
An RS-485 Network with Automatic Data Flow Control
Using RS-232 Software
The RS-485 mode automatically senses the direction of incoming
data and switches its transmission direction accordingly. This feature
makes your network look and act just like an RS-232 network.
Application software written for half duplex RS-232 can be used
without modification. Moreover, you can simply and quickly build an
RS-485 network with just two wires.
1 in stock
Features PCL-847B:
• Four independent RS-422/485 serial ports PCL-847B
• Transmission speeds up to 921.6 Kbps
• Independent/shared IRQ settings between each of the 4 serial ports
• Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15
• Supports standard DOS COM1, COM2, COM3, and COM4
• Supports DOS/Windows 3.1 (PC-ComLIB), Windows 95/98,
Windows NT (ICOM Utility)
• Provides 1000 VDC isolation (PCL-846A/846B only)
• Provides 3000 VDC surge protection (PCL-846B/847B)
• Space reserved for termination resistors
• Supports 2 wire or 4 wire operation
• Supports Tx, Rx, RTS, and CTS signals
• Automatic RS-485 data flow control or RTS control
Introduction PCL-847B:
PCL-846/847 series cards provide four independent RS-422/485
serial ports on a card. Each port has a 16C550 UART with an on-chip
16-byte FIFO buffer for reliable, high-speed serial I/O. The UART
buffers data into 16-byte packets before putting it on the bus. This
drastically reduces the CPU load and avoids data loss when the
system is busy and cannot process the interrupt quickly. The UART
is especially useful for high speed serial I/O under Windows.
PCL-846 cards differ from PCL-847 cards in that they utilize
on-board optical isolators to protect your PC and equipment against
damage from ground loops, increasing system reliability in harsh
environments. To further increase reliability, PCL-846B/847B cards
include surge protection technology, protecting your system from
abrupt high voltage surges (up to 3000 V) such as those caused by
lightning during thunderstorms.
An RS-485 Network with Automatic Data Flow Control
Using RS-232 Software
The RS-485 mode automatically senses the direction of incoming
data and switches its transmission direction accordingly. This feature
makes your network look and act just like an RS-232 network.
Application software written for half duplex RS-232 can be used
without modification. Moreover, you can simply and quickly build an
RS-485 network with just two wires.
Shipping Policy
Shipping Worldwide
Refund Policy
Refunds
Returns are only accepted if product are not as specified or have any defects.Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at {email address}.
Sale items
Only regular priced items may be refunded. Sale items cannot be refunded.
Exchanges
We only replace items if they are defective or damaged.
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and they will find out about your return.
Shipping returns
To return your product, you should mail your product.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you may vary.
If you are returning more expensive items, you may consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Need help?
Cancellation / Return / Exchange Policy
Overview
Our refund and returns policy lasts 30 days. Returns are only accepted if product are not as specified or have any defects.If 30 days have passed since your purchase, we can’t offer you a full refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted:
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened.
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error.
- Any item that is returned more than 30 days after delivery
General Inquiries
There are no inquiries yet.
Related products
-
PCL-847A – 4 Port RS-422/485 Card
180,00 € Excl. VATAdd to cartFeatures PCL-847A :
• Four independent RS-422/485 serial ports
• Transmission speeds up to 921.6 Kbps
• Independent/shared IRQ settings between each of the 4 serial ports
• Wide IRQ selection: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15
• Supports standard DOS COM1, COM2, COM3, and COM4
• Supports DOS/Windows 3.1 (PC-ComLIB), Windows 95/98,
Windows NT (ICOM Utility)
• Provides 1000 VDC isolation (PCL-846A/846B only)
• Provides 3000 VDC surge protection (PCL-846B/847B)
• Space reserved for termination resistors
• Supports 2 wire or 4 wire operation
• Supports Tx, Rx, RTS, and CTS signals
• Automatic RS-485 data flow control or RTS control PCL-847AIntroduction:
PCL-846/847 series cards provide four independent RS-422/485
serial ports on a card. Each port has a 16C550 UART with an on-chip
16-byte FIFO buffer for reliable, high-speed serial I/O. The UART
buffers data into 16-byte packets before putting it on the bus. This
drastically reduces the CPU load and avoids data loss when the
system is busy and cannot process the interrupt quickly. The UART
is especially useful for high speed serial I/O under Windows.
PCL-846 cards differ from PCL-847 cards in that they utilize
on-board optical isolators to protect your PC and equipment against
damage from ground loops, increasing system reliability in harsh
environments. To further increase reliability, PCL-846B/847B cards
include surge protection technology, protecting your system from
abrupt high voltage surges (up to 3000 V) such as those caused by
lightning during thunderstorms.An RS-485 Network with Automatic Data Flow Control
Using RS-232 Software
The RS-485 mode automatically senses the direction of incoming
data and switches its transmission direction accordingly. This feature
makes your network look and act just like an RS-232 network.
Application software written for half duplex RS-232 can be used
without modification. Moreover, you can simply and quickly build an
RS-485 network with just two wires.Specifications PCL-847A :
• Ports: 4
• UART: 4 x 16C550 with 16-byte FIFO
• Speed: 50 ~ 921.6 Kbps
• Parity: none, even, odd
• Signal support:
TxD+, TxD-, RxD+, RxD-, CTS+, CTS-, RTS+ and RTS-
• I/O address: From 200H to 3F8H
• IRQ: 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15
• Isolation voltage: 1000 VDC (PCL-846A/846B only)
• Surge protection: 3000 VDC (PCL-846B/847B)
• Power consumption: +5 V @ 250 mA typical, 500 mA max.
• Cables: 30-cm male DB-37 to four male DB-9 (DTE)
• Operating temperature: 0 ~ 60° C (32 ~ 140° F)
• Storage temperature: -25 ~ 80° C (-13 ~ 176° F)
• Dimensions: 185 mm x 100 mm (7.3″ x 3.9″) -
PCL-733 – 32Ch.Isolated DI Card W.Inter.
212,00 € Excl. VATAdd to cartFeatures PCL-733 :
√ 32 isolated, digital input channels PCL-733
√ High-voltage isolation (2,500 VDC)
√ Interrupt capacity
√ D-type connectors for isolated input channels
√ Reverse voltage protection for isolated input channels (up to 24 VDCSpecifications PCL-733 :
Isolated Digital Input
√ Input Channels 32 (16-ch/group)
√ Input Voltage Logic 0: PCI-1733: 2 V max., PCL-733: 1 V max.
Logic 1: 5 V min.
PCI-1733: 30 V max., PCL-733: 24 V max.√Interrupt Capable Ch. 4 for PCI-1733, 2 for PCL-733
√ Isolation Protection 2,500 VDC
√ Opto-Isolator Response PCL-733: 100 µs, PCI-1733: 25 µs
√ Input Resistance PCI-1733: 2.7 kΩ @ 1 W
: 1.2 kΩ @ 0.5 W
General
√ Bus Type PCI-1733: PCI V2.2, : ISA
√ I/O Connectors 1 x 37-pin D-type female
√ Dimensions (L x H) : 185 x 100 mm (7.3” x 3.9”)
: 175 x 100 mm (6.9” x 3.9”)
√ Power Consumption
: Typical: +5 V @ 320 mA
Max: +5 V @ 500 mA
PCI-1733: Typical: 5V @ 200 mA, 12 V @ 50 mA
Max: 5V @ 350 mA, 12 V @ 75 mA
√ Operating Temperature 0 ~ 60° C (32 ~ 140° F)
√ Storing Temperature PCL-733: -20 ~ 70° C (-4 ~ 158° F)
PCI-1733: -25 ~ 85° C (-13 ~ 185° F)
√ Storing Humidity 5 ~ 95% RH, non-condensing (IEC 68-2-3)Ordering Information
√ PCI-1733 32-channel isolated PCI digital input card, manual and
driv er CD-ROM (cable not included)
√ 32-channel isolated digital input card, manual and
driver CD-ROM (cable not included)
√ PCLD-780 Universal screw terminal board
√ PCLD-880 Universal screw terminal board
√ ADAM-3937 DB37 wiring terminal for DIN-rail mounting
√ PCL-10137-1 DB37 cable, 1m
√ PCL-10137-2 DB37 cable, 2m
√ PCL-10137-3 DB37 cable, -
PCL-721 – 32 Channel D/I Card
156,00 € Excl. VATAdd to cartIntroduction PCL-721 :
The PCL-721/723 is a 32/24-channel digital input card with independent
interrupt capabilities that allows the PCL-721/723 to work in the
background while the processor perform other jobs in the foreground. With
this feature, your system can do real-time Process monitoring without
polling its inputs, channel by channel.The PCL-721/723 has two modes: normal and interrupt. While it is set to
normal mode, the PCL-721/723 serves as a general purpose multi-channel
digital input card. However,if it is set to interrupt mode, then each channel
will generate an interrupt request to the PC, once the channel input has
changed.The 32digital input channels ofthe PCL-721 are divided into 4 groups. The
24 digital input channels of the PCL-723 are divided into 3 groups. Each
group handles8 digital input channels. There is a register that reflects the
interrupt status of each groups. Users can first read this register to check
which group caused the interrupt, then by reading the 8channels’ status of
that group, you can easily find which channel generated the interrupt. This
two-pass feature saves lot of time to determine which service routine should
be executed in your ISR (Interrupt Service Routine).The PCL-721/723 is easy to configure. No switch or jumper settings are
needed (except the I/O base address). The IRQ level, individual channel’s
trigger mode (rising or falling edge), and interrupt mask (enable or disable)
are all software programmable