DB37 Cable
- Double-shielded cable with 37-pin D-sub connectors
- D-Sub 37 pin male, Blue x 2
- Tinned and strand copper wire with drain wire x 1
- Aluminum/Mylar foil and braided copper double-shielded cable
- Isolated P.V.C. jacket
- UL20397 approved
- Ivory Color
General Inquiries
There are no inquiries yet.
Related products
-
PCLD-880 – Industrial TERMINAL Board
108,00 € Excl. VATAdd to cartWiring Terminal Board with Flat Cables and Adapter Pin to pin design Low-cost universal screw-terminal boards for industrial applications 40 terminal points for two 20-pin flat cable connector ports Reserved space for signal-conditioning circuits, such as a low-pass filter, voltage attenuator and c Table-top mounting using nylon standoffs. Screws and washers provided for panel or …
-
PCL-813B – 32 Ch.AD S.E Isolated A/D Card
533,00 € Excl. VATAdd to cartFeatures PCL-813B:
√32 single-ended analog input channels PCL-813B
√12-bit A/D converter, with up to 100 kHz sampling rate
√Isolation protection (500 VDC)
√Program-controlled A/D trigger and data transferIntroduction :
PCL-813B is a 12-bit 32-channel analog input card that offers high-voltage isolation on each analog input. It is an extremely cost effective solution for applications in industrial
measurement and monitoring. The card offers 32 analog input channels with software programmable gain on each channel and two DC-to-DC converters on a 4-layer PCB with an
integral ground plane. Optically-isolated inputs provide over 500 VDC of isolation between the analog inputs and the PC, protecting the PC and peripherals from damage due to high
voltages on the input lines. PCL-813B is ideal for situations where the budget-conscious user requires flexibility, stability and a high level of isolation protection. PCL-813B comes
with the PCLD-881 wiring terminal board and a DB-37 cable assembly.Specifications PCL-813B:
Analog Input
Channels 32 single-ended
Resolution 12 bits,
Max. Sampling Rate 25 kHz
Overvoltage Protection Continuous ±30 V (max.)
Isolation Protection 500 VDC from analog input to PC
Input Impedance > 10 MΩ
Sampling Modes software trigger
Input Range (V)General:
Bus Type ISA
I/O Connectors 1 x DB37-F
Dimensions (L x H) 219 x 100 mm (8.6″ x 3.9″)
Power Consumption +5 V @ 660 mA max.
+12 V @ 140 mA max.
Operating Temperature 0 ~ 50° C (32 ~ 122° F)
Storing Temperature -20 ~ 65° C (-4 ~ 149° F)
Storing Humidity 5 ~ 95% RH non-condensing (refer to IEC 68-2-3) -
POC-174CB-AC- A Point-of-Care Terminal
860,00 € – 882,00 € Excl. VATSelect optionsThe POC-174 is a medical-grade Point-of Care Panel PC with a 17” display optimized for minimal power leakage and low EMI. It is approved according to EN60601-1 and UL2601-1 standards. This certifies that there is no interference with medical equipment that can pose a health risk for patients. The POC-174 has also been also approved with IP65/NEMA 4 and IPX1 for dust-resistance and water spills. Like the other products in the POC series, the POC-174 has all the characteristics needed for use in critical medical environments. Its high brightness, resolution, and contrast ratio LCD display is especially suitable for medical diagnosis and treatment methods like: CT diagnosis, electrical X-ray, PACS and DICOM. With a wide range of I/O options, the POC series supply full connectivity, and offer the most secure and practical healthcare terminals for patients and practitioners.
Manufacturer’s warranty has expired.
Specifications POC-174CB-AC-
General
§ Dimension (W x H x D) 437 x 377 x 131 mm (17.20″ x 14.84″ x 5.15″)
§ Weight 12 kg (26.5 lb)
§ Power Supply AC model: 180 watt
Input voltage: 100 ~ 240 VAC, 4 A max.@ 50 ~ 60 Hz
Output voltages: +5 V @ 12 A, +12 V @ 12 A
+3.3 V @ 16.8 A, +5 Vsb @ 2.0 A, -12 V @ 0.8 A DC model:
Input voltage: +24 VDC, 7.5 A max
Output voltage: +5 V @ 10 A, +12 V @ 4 A,
-12 V @ 1 A, +3.3 V @ 8 A, +5 Vsb @ 0.75 A
§ Cooling Fan (L x W x H) 60 x 60 x 10 mm (2.4″ x 2.4″ x 2.4″)
§ Front Panel IP65/NEMA compliant
Standard PC Functions
§ CPU Intel® Pentium® 4 Mobile
§ Memory 2 x 184-pin DIMM socket accepts up to 2 GB DDR333/266 DRAM 1GB installed)
§ HDD 1 x 2.5″ IDE HDD
§ FDD 1.44 MB
§ CD ROM Slim type (Optional: CD-RW/DVD-ROM)
§ PCMCIA 2x Type II
§ I/O Ports &Speakers 4 x Serial ports: 3 x RS-232, 1 x RS-232/422/485;
1 x Parallel port
2 x USB ports
1 x PS/2 mouse and keyboard interface
1x Mic-in
1 x Line-in
1 x Speaker-out
2 x 1 W speakers
§ Network (LAN) 2 x 10/100Base-T Ethernet interface
§ Bus Expansion 1 x PCI 2.2 expansion slot
§ Optional 802.11b wireless antenna with wireless LAN PCMCIA module
Display Specifications
§ Display Type 17″ TFT LCD
§ Max.Resolution 1280 x 1024
§ Colors 16.7 M (8 bits/color)
§ Dot Size (mm) 0.264 x 0.264
§ Viewing Angle 170°
§ Luminance 250 cd/m2
§ Contrast Ratio 600 : 1
§ LCD MTBF 50,000 hours
§ Backlight Lifetime 40,000 hours
Specifications Cont.
Environmental Specifications
§ Temperature 0 ~ 40° C
§ Relative Humidity 10 ~ 95% @ 40° C (non-condensing)
§ Shock 50 G peak acceleration (11 msec duration)
§ Power MTBF 100,000 hrs
§ Certifications CE, FCC, VCCI, BSMI approved
§ AC Model UL60950, UL60601-1, EN60950, EN60601-1 approved
§ DC Model FCC, UL60601-1, EN60601-1 approved
Mounting
- Vesa 75 x 75 mm, 100 x 100 mm
