PCI-1737U – 24 Channel TTL Digital I/O Card
93,00 € Excl. VAT
Features PCI-1737U :
√24 TTL digital I/O channels
√Emulates mode 0 of 8255 PPI
√Interrupt handling
√Opto-22 compatible 50-pin connectors
√Output status readback
√PCI universal card
Specifications:
Digital Input:
√Channels 24 (shared with output)
√Compatibility 5 V/TTL
√Input Voltage Logic 0: 0.8 V max.
√Logic 1: 2.0 V min.
√Interrupt Capable Ch. 1
Digital Output
√Channels 24 (shared with input)
√Compatibility 5 V/TTL
√Output Voltage Logic 0: 0.4 V max.
√Logic 1: 2.4 V min.
√Output Capability Sink: 0.4 V max. @ 24 mA
√Source: 2.4 V min. @ 15 mA
General
√Bus Type PCI-1737: Universal PCI V2.2
√PCL-724: ISA
√I/O Connectors 50-pin male ribbon-cable connector
√Dimensions (L x H) 175 x 100 mm (6.9″ x 3.9″)
√Power Consumption Max: +5 V @ 294.9 mA
√Operating Temperature 0 ~ 65° C (32 ~ 149° F)
√Storing Temperature -25 ~ 80° C (-13 ~ 176° F)
√Storing Humidity 5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
1 in stock
Features PCI-1737U :
√24 TTL digital I/O channels
√Emulates mode 0 of 8255 PPI
√Interrupt handling
√Opto-22 compatible 50-pin connectors
√Output status readback
√PCI universal card
Specifications:
Digital Input:
√Channels 24 (shared with output)
√Compatibility 5 V/TTL
√Input Voltage Logic 0: 0.8 V max.
√Logic 1: 2.0 V min.
√Interrupt Capable Ch. 1
Digital Output
√Channels 24 (shared with input)
√Compatibility 5 V/TTL
√Output Voltage Logic 0: 0.4 V max.
√Logic 1: 2.4 V min.
√Output Capability Sink: 0.4 V max. @ 24 mA
√Source: 2.4 V min. @ 15 mA
General
√Bus Type PCI-1737: Universal PCI V2.2
√PCL-724: ISA
√I/O Connectors 50-pin male ribbon-cable connector
√Dimensions (L x H) 175 x 100 mm (6.9″ x 3.9″)
√Power Consumption Max: +5 V @ 294.9 mA
√Operating Temperature 0 ~ 65° C (32 ~ 149° F)
√Storing Temperature -25 ~ 80° C (-13 ~ 176° F)
√Storing Humidity 5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
| Dimensions | 236 × 160 × 55 cm |
|---|
Shipping Policy
Shipping Worldwide
Refund Policy
Refunds
Returns are only accepted if product are not as specified or have any defects.Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at {email address}.
Sale items
Only regular priced items may be refunded. Sale items cannot be refunded.
Exchanges
We only replace items if they are defective or damaged.
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and they will find out about your return.
Shipping returns
To return your product, you should mail your product.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you may vary.
If you are returning more expensive items, you may consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Need help?
Cancellation / Return / Exchange Policy
Overview
Our refund and returns policy lasts 30 days. Returns are only accepted if product are not as specified or have any defects.If 30 days have passed since your purchase, we can’t offer you a full refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted:
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened.
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error.
- Any item that is returned more than 30 days after delivery
General Inquiries
There are no inquiries yet.
Related products
-
PCI-1625 – 8-Port Intelligent RS-232 Card
365,00 € Excl. VATAdd to cartFEATURES PCI-1625:
√RISC processor (TMS320)
√1 MB SRAM
√PCI Specification 2.2 compliant
√Speed up to 921.6 kbps
√8-port RS-232
√I/O address automatically assigned by PCI Plug &Play
√OS supported: Windows 2000/XP
√Powerful and easy to use utility (ICOM tools)
√Link with OPT8FP peripherals up to 1200m (4000ft) from controller (RS-422)
√Universal PCI (Supports 3.3 V or 5 V PCI bus signal) -
PCI-1753 – 96bit Digital I/O Card PCI BUS
177,00 € Excl. VATAdd to cartFeatures PCI-1753 :
• 96/192 TTL digital I/O lines
• Emulates mode 0 of 8255 PPI
• Buffered circuits for higher driving capacity than 8255
• Multiple-source interrupt handling
• Interrupt output pin for simultaneously triggering external
devices with the interrupt
• Output status read-back
• “Pattern match” and “Change of state” interrupt functions for
critical I/O monitoring
• Keeps I/O setting and digital output values when hot system
reset
• Supports dry contact and wet contact
• High-density 100-pin SCSI connectorIntroduction PCI-1753 :
The PCI-1753 is a 96-bit digital I/O card for the PCI bus, which can be
extended to 192 digital I/O channels by connecting with its extension
board, PCI-1753E. The card emulates mode 0 of the 8255 PPI chip,
but the buffered circuits offer a higher driving capability than the 8255.
The 96 I/O lines are divided into twelve 8-bit I/O ports: A0, B0, C0, A1,
B1, C1, A2, B2, C2, A3, B3 and C3. Users can configure each port as
input or output via software.
Easy to Install: Plug and Play
The PCI-1753 uses a PCI controller to interface the card to the PCI bus.
The controller fully implements the PCI bus specification Rev 2.1. All
bus relative configurations, such as base address and interrupt
assignment, are automatically controlled by software.Dry Contact Support for Digital Input
Each digital input channel of the PCI-1753/1753E accepts either 0 ~ 5
VDC wet contact or dry contact inputs. This dry contact capability allows
the channel to respond to changes in external circuitry (e.g., the closing
of a switch in the external circuitry) when no voltage is present in the
external circuit.
Reset Protection Fulfills the True Requirement of Industrial
Applications
When the system is hot reset (the power is not turned off), the
PCI-1753/1753E can either retain the value of the last I/O port settings
and outputs, or return to its default configuration, depending on the
jumper setting. This function protects the system from wrong operations
during unexpected system resets.Interrupt Functions Ensure Faster System Response
Two lines of each port C (i.e., ports C0, C1, C2 and C3) are connected
to an interrupt circuit. The “Interrupt Control Register” of the
PCI-1753/PCI-1753E controls how these signals generate an interrupt.
Two interrupt request signals can be generated at the same time, and
then the software can process these two request signals by ISR. The
dual interrupt sources provide the card with more capability and flexibility.
The PCI-1753/1753E also provides “Pattern Match” interrupt function
for port A0. The card monitors the states of port A0 and compares
them with a pre-set pattern. When the received state matches the preset pattern, the PCI-1753/1753E generates an interrupt signal to the
system.
“Change of State” interrupt function is provided at port B0. When any
signal line of port B0 changes its state, the card generates an interrupt
to the system to handle this event.
These interrupt functions release the CPU from the burden of pulling all
I/O points, enabling a PC to handle more I/O points with higher
performance.Cost Savings for Increasing the Number of Input/Output Lines
Industrial users are needing more and more digital I/O lines to transmit
data or to monitor/control outside devices. To meet this trend and to
satisfy user’s budget considerations, Advantech has developed an
extension board for the PCI-1753 called the PCI-1753E. The PCI1753E has almost the same structure as the PCI-1753, without the
interface controller. It shares PCI-1753’s interface controller through a
10-cm flat cable connection, so users can spend less money while
doubling the number of input/output lines.
Accessories for PCI-1753/1753E
The PCI-1753/1753E uses a 100-pin SCSI female connector. For easy
signal wiring, a PCI-1753 can be connected to two ADAM-3968s by a
100-pin to 2×68-pin SCSI cable (part number PCL-10268). The
ADAM-3968 allows easy access for wiring the individual pins of a
68-pin SCSI connector. An ADAM-3968/50 adapter board converts the
68-pin connector to two opto-22 compatible 50-pin box headers
for connecting the PCI-1753/1753E to daughterboards, such as
PCLD-782B and PCLD-785B. -
PCI-1757UP – 24bit ttl Digital I/O Card Low Profile PCI BUS Card
119,00 € Excl. VATAdd to cartFeatures PCI-1757UP :
• Low profile PCI card PCI-1757UP
• Universal PCI card, adapt 3.3V and 5V PCI slot
• 24 TTL level digital I/O lines
• Emulates mode 0 of 8255 PPI
• Buffered circuits provide higher driving capability
• Output status read-back
• I/O configurable by software or on board DIP switch
• Keeps port I/O settings and digital output states after hot reset
• Board ID set by DIP switch
• High density D-SUB 25-pin connectorIntroduction:
The PCI-1757UP is a 24-bit DI/O 1low profile PCI card. It meets the PCI
standard REV.2.2 (universal PCI expansion card), and works with both
3.3V and 5V PCI slot. It provides users with 24 bits of parallel digital
input/output, emulates mode 0 of the 8255 PPI chip, but the buffered
circuits offer a higher driving capability than the 8255.Specifications PCI-1757UP :
Digital Input
• Logic High Voltage: 2.0 to 5.25 V
• Logic Low Voltage: 0.0 to 0.80 V
• High Level Input Current: 20 mA
• Low Level Input Current: -0.2 mA
Digital Output
• Logic High Voltage: 2.4 V minimum
• Logic Low Voltage: 0.4 V maximum
• High Level Input Current: 15 mA maximum (source)
• Low Level Input Current: 24 mA maximum (sink)
• Driving Capability: 15 LS TTL
Interrupt Source
• PC0, PC4
General
• Connector: one D-SUB 25-pin female connector
• Power Consumption: 5 V @ 140 mA (Typical)
• Operating Temperature: 0 ~ 70° C (32° F ~ 158° F)
• Storage Temperature: -20 ~ 80° C (-4° F ~ 176° F)
• Humidity: 5% ~ 95% non-condensing• Dimension: 119.91 x 64.41 mm (4.721″ x 2.536″) Low profile PCI
MD1 card sizeOrdering Information
❑ PCI-1757UP
24-channel Digital Input/Output Card
❑ ADAM-3925
DB-25 wiring terminal for DIN-rail mounting