EKI-1121L – 1 Port Programmable Device Server CPU ARM7
204,00 € Excl. VAT
Features EKI-1121L :
√ARM7 32-bit 80MHz processor
√ 8MB Flash ROM on board
√16MB SDRAM
√ 2 x 10/100 Mbps Ethernet ports for LAN redundancy
√ 1 or 2 software selectable RS-232/422/485 serial ports
√ 50 bps to 921.6 kbps baud rate
√ Built-in real-time clock (RTC)
√ Class I, Division 2 certification
√ Pre-installed Linux Kernel 2.4 platform
Introduction :
EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or
two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or
protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications.
Specifications of EKI-1121L :
System
√ CPU ARM7 32-bit RISC CPU, 80 MHz
√ Flash 8 MB
√ SDRAM 16 MB
√ OS (pre-installed) uClinux
√ Console Port RS-232, 3-wire (Tx, Rx, GND) pin-header
√ Other RTC, watchdog timer
Ethernet Interface
√ LAN 2 x auto-sensing 10/100 Mbps ports
√ Connector RJ-45
√ Protection 1.5 kV magnetic isolation protection
Serial Interface
√ Serial Standards Software selectable RS-232/422/485 ports
√ Connectors D-sub 9 male
√ Protection 15 kV ESD protection for all signals
Serial Parameters
√ Data Bits 5, 6, 7, 8
√ Stop Bits 1, 1.5, 2
√ Parity None, Even, Odd, Space, Mark
√ Flow Control RTS/CTS, XON/XOFF, automatic RS-485 data flow
control
√ Baud Rate 50 bps to 921.6 kbps
Serial Signals
√ RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND
√ RS-422 TxD+, TxD-, RxD+, RxD-, GND
√ RS-485 Data+, Data-, GND
LEDs
√ System OS ready, power 1 and power 2 ready
√ LAN Speed (10/100 Mbps), link/active (on connector)
√ Serial TxD, RxD
Mechanics
√ Dimensions 37 x 140 x 95 mm (W x H x D)
√ Housing Metal
√ Weight 600g
√ Mounting DIN-rail, wall
Power Requirements
√ Input Voltage 12 ~ 48 VDC, redundant dual inputs
√ Power Consumption 2.5 W
Software (uClinux)
√ Kernel Version 2.4.31
√ Protocol Stack TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP,
NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
√ File System ROMFS/JFFS2
√ System Utility busybox, telnet, ftp, sash, tftp
√ Daemon pppd, snmpd, telnetd, inted, ftpd, boa
√ Linux Tool Chain Arm-elf-gcc: C/C++ PC Cross Compiler
√ uClibc POSIX Standard Library
1 in stock
Features EKI-1121L :
√ARM7 32-bit 80MHz processor
√ 8MB Flash ROM on board
√16MB SDRAM
√ 2 x 10/100 Mbps Ethernet ports for LAN redundancy
√ 1 or 2 software selectable RS-232/422/485 serial ports
√ 50 bps to 921.6 kbps baud rate
√ Built-in real-time clock (RTC)
√ Class I, Division 2 certification
√ Pre-installed Linux Kernel 2.4 platform
Introduction :
EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or
two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or
protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications.
Specifications of EKI-1121L :
System
√ CPU ARM7 32-bit RISC CPU, 80 MHz
√ Flash 8 MB
√ SDRAM 16 MB
√ OS (pre-installed) uClinux
√ Console Port RS-232, 3-wire (Tx, Rx, GND) pin-header
√ Other RTC, watchdog timer
Ethernet Interface
√ LAN 2 x auto-sensing 10/100 Mbps ports
√ Connector RJ-45
√ Protection 1.5 kV magnetic isolation protection
Serial Interface
√ Serial Standards Software selectable RS-232/422/485 ports
√ Connectors D-sub 9 male
√ Protection 15 kV ESD protection for all signals
Serial Parameters
√ Data Bits 5, 6, 7, 8
√ Stop Bits 1, 1.5, 2
√ Parity None, Even, Odd, Space, Mark
√ Flow Control RTS/CTS, XON/XOFF, automatic RS-485 data flow
control
√ Baud Rate 50 bps to 921.6 kbps
Serial Signals
√ RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND
√ RS-422 TxD+, TxD-, RxD+, RxD-, GND
√ RS-485 Data+, Data-, GND
LEDs
√ System OS ready, power 1 and power 2 ready
√ LAN Speed (10/100 Mbps), link/active (on connector)
√ Serial TxD, RxD
Mechanics
√ Dimensions 37 x 140 x 95 mm (W x H x D)
√ Housing Metal
√ Weight 600g
√ Mounting DIN-rail, wall
Power Requirements
√ Input Voltage 12 ~ 48 VDC, redundant dual inputs
√ Power Consumption 2.5 W
Software (uClinux)
√ Kernel Version 2.4.31
√ Protocol Stack TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP,
NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
√ File System ROMFS/JFFS2
√ System Utility busybox, telnet, ftp, sash, tftp
√ Daemon pppd, snmpd, telnetd, inted, ftpd, boa
√ Linux Tool Chain Arm-elf-gcc: C/C++ PC Cross Compiler
√ uClibc POSIX Standard Library
Shipping Policy
Shipping Worldwide
Refund Policy
Refunds
Returns are only accepted if product are not as specified or have any defects.Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at {email address}.
Sale items
Only regular priced items may be refunded. Sale items cannot be refunded.
Exchanges
We only replace items if they are defective or damaged.
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and they will find out about your return.
Shipping returns
To return your product, you should mail your product.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you may vary.
If you are returning more expensive items, you may consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Need help?
Cancellation / Return / Exchange Policy
Overview
Our refund and returns policy lasts 30 days. Returns are only accepted if product are not as specified or have any defects.If 30 days have passed since your purchase, we can’t offer you a full refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted:
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened.
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error.
- Any item that is returned more than 30 days after delivery
General Inquiries
There are no inquiries yet.
Related products
-
EKI-1122L – 2 Port Programmable Device Server CPU ARM7
248,00 € Excl. VATAdd to cartFeatures EKI-1121L :
√ARM7 32-bit 80MHz processor
√ 8MB Flash ROM on board
√16MB SDRAM
√ 2 x 10/100 Mbps Ethernet ports for LAN redundancy
√ 1 or 2 software selectable RS-232/422/485 serial ports
√ 50 bps to 921.6 kbps baud rate
√ Built-in real-time clock (RTC)
√ Class I, Division 2 certification
√ Pre-installed Linux Kernel 2.4 platformIntroduction :
EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or
two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or
protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications.Specifications of EKI-1122L :
System
√ CPU ARM7 32-bit RISC CPU, 80 MHz
√ Flash 8 MB
√ SDRAM 16 MB
√ OS (pre-installed) uClinux
√ Console Port RS-232, 3-wire (Tx, Rx, GND) pin-header
√ Other RTC, watchdog timerEthernet Interface
√ LAN 2 x auto-sensing 10/100 Mbps ports
√ Connector RJ-45
√ Protection 1.5 kV magnetic isolation protection
Serial Interface
√ Serial Standards Software selectable RS-232/422/485 ports
√ Connectors D-sub 9 male
√ Protection 15 kV ESD protection for all signals
Serial Parameters
√ Data Bits 5, 6, 7, 8
√ Stop Bits 1, 1.5, 2
√ Parity None, Even, Odd, Space, Mark
√ Flow Control RTS/CTS, XON/XOFF, automatic RS-485 data flow
control
√ Baud Rate 50 bps to 921.6 kbpsSerial Signals
√ RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND
√ RS-422 TxD+, TxD-, RxD+, RxD-, GND
√ RS-485 Data+, Data-, GND
LEDs
√ System OS ready, power 1 and power 2 ready
√ LAN Speed (10/100 Mbps), link/active (on connector)
√ Serial TxD, RxDMechanics
√ Dimensions 37 x 140 x 95 mm (W x H x D)
√ Housing Metal
√ Weight 600g
√ Mounting DIN-rail, wall
Power Requirements
√ Input Voltage 12 ~ 48 VDC, redundant dual inputs
√ Power Consumption 2.5 W
Software (uClinux)
√ Kernel Version 2.4.31
√ Protocol Stack TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP,
NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
√ File System ROMFS/JFFS2
√ System Utility busybox, telnet, ftp, sash, tftp
√ Daemon pppd, snmpd, telnetd, inted, ftpd, boa
√ Linux Tool Chain Arm-elf-gcc: C/C++ PC Cross Compiler
√ uClibc POSIX Standard Library