Showing all 2 results

• 

  EKI-1121L – 1 Port Programmable Device Server CPU ARM7

  204,00 € Excl. VAT

  Features  EKI-1121L  :

  √ARM7 32-bit 80MHz processor
  √ 8MB Flash ROM on board
  √16MB SDRAM
  √ 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  √ 1 or 2 software selectable RS-232/422/485 serial ports
  √ 50 bps to 921.6 kbps baud rate
  √ Built-in real-time clock (RTC)
  √ Class I, Division 2 certification
  √ Pre-installed Linux Kernel 2.4 platform

  Introduction :

  EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or
  two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or
  protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications.

  Specifications of EKI-1121L :

  System
  √ CPU ARM7 32-bit RISC CPU, 80 MHz
  √ Flash 8 MB
  √ SDRAM 16 MB
  √ OS (pre-installed) uClinux
  √ Console Port RS-232, 3-wire (Tx, Rx, GND) pin-header
  √ Other RTC, watchdog timer

  Ethernet Interface
  √ LAN 2 x auto-sensing 10/100 Mbps ports
  √ Connector RJ-45
  √ Protection 1.5 kV magnetic isolation protection
  Serial Interface
  √ Serial Standards Software selectable RS-232/422/485 ports
  √ Connectors D-sub 9 male
  √ Protection 15 kV ESD protection for all signals
  Serial Parameters
  √ Data Bits 5, 6, 7, 8
  √ Stop Bits 1, 1.5, 2
  √ Parity None, Even, Odd, Space, Mark
  √ Flow Control RTS/CTS, XON/XOFF, automatic RS-485 data flow
  control
  √ Baud Rate 50 bps to 921.6 kbps

  Serial Signals
  √ RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND
  √ RS-422 TxD+, TxD-, RxD+, RxD-, GND
  √ RS-485 Data+, Data-, GND
  LEDs
  √ System OS ready, power 1 and power 2 ready
  √ LAN Speed (10/100 Mbps), link/active (on connector)
  √ Serial TxD, RxD

  Mechanics
  √ Dimensions 37 x 140 x 95 mm (W x H x D)
  √ Housing Metal
  √ Weight 600g
  √ Mounting DIN-rail, wall
  Power Requirements
  √ Input Voltage 12 ~ 48 VDC, redundant dual inputs
  √ Power Consumption 2.5 W
  Software (uClinux)
  √ Kernel Version 2.4.31
  √ Protocol Stack TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP,
  NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
  √ File System ROMFS/JFFS2
  √ System Utility busybox, telnet, ftp, sash, tftp
  √ Daemon pppd, snmpd, telnetd, inted, ftpd, boa
  √ Linux Tool Chain Arm-elf-gcc: C/C++ PC Cross Compiler
  √ uClibc POSIX Standard Library

  Add to cart
  Store:  Vendor Advantech AE.

  0 out of 5
• 

  EKI-1122L – 2 Port Programmable Device Server CPU ARM7

  248,00 € Excl. VAT

  Features  EKI-1121L  :

  √ARM7 32-bit 80MHz processor
  √ 8MB Flash ROM on board
  √16MB SDRAM
  √ 2 x 10/100 Mbps Ethernet ports for LAN redundancy
  √ 1 or 2 software selectable RS-232/422/485 serial ports
  √ 50 bps to 921.6 kbps baud rate
  √ Built-in real-time clock (RTC)
  √ Class I, Division 2 certification
  √ Pre-installed Linux Kernel 2.4 platform

  Introduction :

  EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or
  two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or
  protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications.

  Specifications of EKI-1122L :

  System
  √ CPU ARM7 32-bit RISC CPU, 80 MHz
  √ Flash 8 MB
  √ SDRAM 16 MB
  √ OS (pre-installed) uClinux
  √ Console Port RS-232, 3-wire (Tx, Rx, GND) pin-header
  √ Other RTC, watchdog timer

  Ethernet Interface
  √ LAN 2 x auto-sensing 10/100 Mbps ports
  √ Connector RJ-45
  √ Protection 1.5 kV magnetic isolation protection
  Serial Interface
  √ Serial Standards Software selectable RS-232/422/485 ports
  √ Connectors D-sub 9 male
  √ Protection 15 kV ESD protection for all signals
  Serial Parameters
  √ Data Bits 5, 6, 7, 8
  √ Stop Bits 1, 1.5, 2
  √ Parity None, Even, Odd, Space, Mark
  √ Flow Control RTS/CTS, XON/XOFF, automatic RS-485 data flow
  control
  √ Baud Rate 50 bps to 921.6 kbps

  Serial Signals
  √ RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND
  √ RS-422 TxD+, TxD-, RxD+, RxD-, GND
  √ RS-485 Data+, Data-, GND
  LEDs
  √ System OS ready, power 1 and power 2 ready
  √ LAN Speed (10/100 Mbps), link/active (on connector)
  √ Serial TxD, RxD

  Mechanics
  √ Dimensions 37 x 140 x 95 mm (W x H x D)
  √ Housing Metal
  √ Weight 600g
  √ Mounting DIN-rail, wall
  Power Requirements
  √ Input Voltage 12 ~ 48 VDC, redundant dual inputs
  √ Power Consumption 2.5 W
  Software (uClinux)
  √ Kernel Version 2.4.31
  √ Protocol Stack TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP,
  NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
  √ File System ROMFS/JFFS2
  √ System Utility busybox, telnet, ftp, sash, tftp
  √ Daemon pppd, snmpd, telnetd, inted, ftpd, boa
  √ Linux Tool Chain Arm-elf-gcc: C/C++ PC Cross Compiler
  √ uClibc POSIX Standard Library

  Add to cart
  Store:  Vendor Advantech AE.

  0 out of 5